Dr. Ahmed Aly Diaa Sarhan

Chairman

Dr. Antar Mohammed A
Department Chairman

Mechanical Engineering Department 63 - 351 +966(13)860-2964 966-13-860 2949 (ME Dept) antar@kfupm.edu.sa
Read More

Professor

Education

Ph.D., Precision Engineering, Kyoto University, Kyoto, Japan

M.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

B.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

Courses Taught

Advanced Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
Machine Tool Engineering, 2007-Present
Basic manufacturing processes, 2009-Present
Introduction to Manufacturing Process, 2009-Present
Tool Engineering, 2009-Present
Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
CNC Technology and Programming 2007-2009

Research Areas

Precision Machining and Computer Integrated Manufacturing (CIM)
Cutting Tool Technology
Non-Conventional Machining
Additive manufacturing, Surface Engineering and Coatings

Representative Publications

Patents

Rotating Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011) http://umfacts.um.edu.my/patent/index.php
Intelligent Lubrication System in CNC Machine Linear guide ways for More Precise Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://www.google.com/patents/WO2014081281A2?cl=en
Modified wheelchair with transferring mechanism to assist the wheelchair-bound person (Patent Number: PI 2012004799 – 16-11-2012) http://umfacts.um.edu.my/patent/index.php
Newly nanolubrication system in CNC machining processes for better product quality, more power savings, and less oil consumption and pollution (Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf
Titanium Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof (Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 – 17/5/2016) http://umfacts.um.edu.my/patent/index.php
A new technique for hard anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012). (Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://umfacts.um.edu.my/patent/index.php
Gear backlash compensation mechanism (GBCM) in rack and pinion system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
An Improved Computer Numerically Controlled Gantry Device and Method Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
A Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 – 29/6/2013) http://umfacts.um.edu.my/patent/index.php
A Wheelchair carrier Attachable Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
Molybdenum Disulfide (MoS2) Nanolubrication system in CNC machining applications (PI 2013004641 – 24/12/2013). http://umfacts.um.edu.my/patent/index.php
Horizontal heat exchanger for thermal energy storage technique (PI 2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015) http://www.google.com/patents/WO2015126238A1?cl=en
Ultrasonic motor with new Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
A novel high-pressure fluid jet in grinding process for less wheel loaded areas (PI 2014703299 - 6 November 2014). http://umfacts.um.edu.my/patent/index.php
Thermal spray of Ceramic oxide thin layer coating to enhance wear and corrosion resistance of carbon steel for oil and gas application(PI 2014701851-11 July 2014) http://umfacts.um.edu.my/patent/index.php
Compact and thin ultrasonic motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
Ultrasonic screw pump (USP) for liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing surface quality and product fabrication speed (PI 2015700874-19/03/2015)
Food Decorating System Patent: (PI 2015700957-March 2015)
Method and Apparatus for Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 - 1 February 2016)
An Electrode Wire for Use in Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
An Electric Discharge Machining Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225 - 21 January 2016)
Electrical Discharge Machining Electrode with Lower Wear Rate (Under process)

Representative Publications (Book Chapter)

Ahmed A. D. Sarhan, Atsushi Matsubara (2013) "High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction", "Electrical Engineering and Intelligent Systems (EEIS)": Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, 2013 "Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool" IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51
Erfan Zalnezhad, Ahmed A.D. Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher Fretting Fatigue Life," Transactions on Engineering Technologies - Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22
M. Sayuti1, Ahmed A. D. Sarhan, (2015) "ANFIS Modeling for Higher Machining Performance of Aerospace Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Chapter 39, 2015, pp 551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39
E Zalnezhad, Ahmed AD Sarhan, 2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN: 978-0-08-100203-2, Pages 239
Ibrahem Maher, Ahmed A.D. Sarhana, H. Marashi, "Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process", Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497
Houriyeh Marashi, Ahmed A. D. Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM Capabilities: A Review," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified Fabrication and Measurement Process of Micro-electrode for Micro-EDM of Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM machine," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 267–321, Volume http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, (2016) "Introducing New Coating Material Alloy with Potential Elements for High Corrosion Resistance for Oil and Gas Application", Advances in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN 978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016 under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology

Representative Publications (ISI Journals)

E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface", International Journal of Advanced Manufacturing Technology, January 2013, V(64), Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy", International Journal of Advanced Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "A Fuzzy Logic based Model to Predict surface hardness of thin film TiN Coating on Aerospace AL70751", International Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue 1-4, pp 415-423. http://dx.doi.org/10.1007/s00170-013-4738-y
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application", International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 453-464. http://dx.doi.org/10.1007/s00170-013-4743-1
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system," The International Journal of Advanced Manufacturing Technology, April 2013, V(65), Issue 9-12, pp 1493-1500, (2012). http://www.springerlink.com/content/a36735143468w772/
Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, "The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy," International Journal of Materials Science & Engineering A, 10 January 2013, V(560), PP 377-387. http://dx.doi.org/10.1016/j.msea.2012.09.082
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy," Materials Science & Engineering A, 1 January 2013, V(559), PP 436-446. http://dx.doi.org/10.1016/j.msea.2012.08.123
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel Loading Phenomena" International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 473-485. http://dx.doi.org/10.1007/s00170-013-4745-z
Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, "Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system" International Journal of Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp 505-512. http://www.springerlink.com/content/a3357l71563g2683/
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Prediction of TiN Coating Adhesion Strength on Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System," International Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue 8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
N. Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End Mill" International Journal of Precision Engineering and Manufacturing, December 2012, V(13), No. 12, pp. 2097-2102. http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
A.A. Hamdan, Ahmed A.D. Sarhan, M. Hamdi, "An Optimization Method of the Machining Parameters in High Speed Machining of Stainless Steel Using Coated Carbide Tool for Best Surface Finish", The International Journal of Advanced Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91. http://www.springerlink.com/content/0208j341m335t3t0/
M. Sayuti1, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach" International Journal of Advanced Manufacturing Technology, June 2012, V(60), Issue 9-12, pp 939-950. http://www.springerlink.com/content/37t53v1435471362/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge Chipping in Glass Milling Operation using an Internal CBN Grinding Tool, International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 8, PP: 969-976. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533
Ahmed A. D. Sarhan, Atsushi Matsubara, "Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces," International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
Ahmed A.D. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation and Tool Wear in End-Milling", Journal of Materials Processing Technology, ( 2001), V(109), No.3, pp 229-235. http://www.sciencedirect.com/science/article/pii/S0924013600008037
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System", International Journal of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp 467-473. http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias "Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays," Journal of the Mechanical Behavior of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, "Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics", Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388. http://dx.doi.org/10.1016/j.jmapro.2013.02.004
Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara，Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors", JSME International Journal, Series C, (2006), Vol.49, No.2, pp.307-315.https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article
M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness" Journal of Advanced Materials Research (2010), V(154-155), pp 721-726. http://www.scientific.net/AMR.154-155.721
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach", International Journal of Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp 1153-1164. http://dx.doi.org/10.1007/s00170-013-5093-8
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, "Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature" International Journal of Precision Engineering and Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.http://link.springer.com/article/10.1007%2Fs12541-013-0197-5
M. Sayuti, Ahmed A. D. Sarhan, S. Salem, "Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140" Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi Abd Shukor, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research, 2013, V(748), pp 264-268.http://www.scientific.net/AMR.748.264
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D. Sarhan, "Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application", Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2, pp 785-797. http://dx.doi.org/10.1007/s11661-013-2043-x
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, "A New Method for Determination of Grinding Wheel Loading Using Digital Image Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013) Paper No: MANU-12-1175; Doi: 10.1115/1.4025782 http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
Mahdi Sparham, Ahmed A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an Automated Lubrication Control System in CNC Machine Tool Guideways for More Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol (2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 1143-1155. http://dx.doi.org/10.1007/s00170-013-5334-x
Ahmed A. D. Sarhan, "Investigate the spindle errors motions from thermal change for high precision CNC machining capability", International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 957-963. http://dx.doi.org/10.1007/s00170-013-5339-5
S. Y. Sia, Ahmed A. D. Sarhan, "Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system", Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071. http://dx.doi.org/10.1007/s00170-013-5340-z
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum disulfide (MoS2) Nanolubrication in End Milling Machining" Journal of Cleaner Production, 66 (2014) 685-691. http://www.sciencedirect.com/science/article/pii/S0959652613007403
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi, "A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending Principle Approach" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan, "Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas" International Journal of Advanced Manufacturing Technology, Volume 70, Issue 9 (2014), Page 2233-2240. http://dx.doi.org/10.1007/s00170-013-5471-2
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Farshid Hasani "Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 632–643. http://www.sciencedirect.com/science/article/pii/S0959652613007828
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M. Hamdi "Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299
N. Zalnezhad, Ahmed A. D. Sarhan, "A Fuzzy Logic Predictive Model for Measured Surface Roughness of Ti-TiN Coating on AL7075-T6 Alloy for Longer Fretting Fatigue Life" Measurement, Volume 49, March 2014, Pages 256–265. http://www.sciencedirect.com/science/article/pii/S0263224113005952
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad Zareinejad, Ahmed A. D. Sarhan, "Disturbance Rejection Based Robust Control for Micro Positioning of Piezoelectric Actuators" Comptes Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, "Investigate the Surface Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach", International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1143-1150. http://dx.doi.org/10.1007/s00170-013-5543-3
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan, "Development of SiO2 Nanolubrication System to be Used In Sliding Bearings" International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1277-1284. http://dx.doi.org/10.1007/s00170-013-5566-9
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, "Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption" Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M. Zareinejad, "Continuous dynamic modeling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behavior analysis" Mathematical and Computer Modeling of Dynamical Systems, Volume 21, Issue 2, 2015, pp. 130-152 http://dx.doi.org/10.1080/13873954.2014.906472
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder and More Wear Resistance of Substrate Surface" International Journal of Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12, pp 1491-1502. http://link.springer.com/article/10.1007/s00170-014-5757-z
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A. R. Bushroa, "A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon- Review Paper", Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N. A. Mardi, "Modified Robust External Force Control with Disturbance Rejection with Application to Piezoelectric Actuators" Transactions of the Institute of Measurement and Control, January 2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY,, "Investigate the effect of the machining parameters on the surface quality of machined Brass (60/40) in CNC End-Milling-Automotive application", International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, pp 531-537. http://dx.doi.org/10.1007/s00170-014-6016-z
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun "Plasma thermal spray of ceramic oxide coating layer to enhance wear and corrosion resistance of carbon steel for oil and gas application" Ceramics international, Volume 40, Issue 9, Part A, November 2014, Pages 14267–14277. http://www.sciencedirect.com/science/article/pii/S027288421400889X#
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation System without Force Sensor", J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587. http://link.springer.com/article/10.1007/s40430-014-0207-2
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D. Sarhan, "Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings", Ceramics international, Volume 40, Issue 10, Part A, December 2014, Pages 15603–15615. http://www.sciencedirect.com/science/article/pii/S0272884214011018
Saeid Baradaran, Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D. Sarhan, Y. Alias, "Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V", Surface and Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990. http://www.sciencedirect.com/science/article/pii/S0257897214006458
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi, "Review on improvement of wire electrodes properties for higher working time and utilization in Wire EDM machining" International Journal of Advanced Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351. http://dx.doi.org/10.1007/s00170-014-6243-3
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill," Advances in Materials Science and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267. http://www.hindawi.com/journals/amse/aip/485267/
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa, "Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy Rule Based Approach" Tribology Transactions Volume 58, Issue 2, pp. 240-246, 2015. http://dx.doi.org/10.1080/10402004.2014.962205
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, "Cutting force based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining", International Journal of Advanced Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467. http://dx.doi.org/10.1007/s00170-014-6379-1
H.Amini, S.M. Rezaei, Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi "Transparency Improvement by External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation System", ASME, Journal of Dynamic Systems, Measurement and Control, 137(5), 051013 (May 01, 2015) (15 pages). http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing Cutting Parameters in Inclined End Milling for Minimum Surface Residual Stress - Taguchi Approach" Measurement, Volume 60, January 2015, Pages 267–275. http://www.sciencedirect.com/science/article/pii/S0263224114004667
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D. Sarhan, S. Ramesh, H. M. Khanlou, "Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning" Measurement, Volume 61, February 2015, Pages 150–161. http://www.sciencedirect.com/science/article/pii/S0263224114004679
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan, Noording Mohd Yusof, "Investigating the Electrical Discharge Machining (EDM) Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material Removal Rate (MRR) and Less TWR - RSM Approach", Int. J Adv Manuf. Technol. (2015) 77: 831–838. http://dx.doi.org/10.1007/s00170-014-6491-2
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed Farahany, Ramesh Singh, Ibrahim Maher, "Machinability of Al-Si-Cu cast alloy containing bismuth and antimony when dry turning using coated carbide insert" Measurement, Volume 62, February 2015, Pages 170–178. http://dx.doi.org/10.1016/j.measurement.2014.10.030
Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md NizamAbd Wahab, "Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy" Measurement, Volume 61, February 2015, Pages 39–50. http://www.sciencedirect.com/science/article/pii/S0263224114004941#
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of Aerospace AL tempered grade 6061" Journal of Cleaner Production, Volume 89, 15 February 2015, Pages 286–295. http://www.sciencedirect.com/science/article/pii/S0959652614011767
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, "Nonlinear dynamic analysis of a new anti-backlash gear mechanism design for reducing dynamic transmission error," ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648
Ahmed A. D. Sarhan, A. Matsubara "Investigate the Characterization of Machine Tool Spindle Stiffness for Intelligent CNC Machining", Robotics and Computer-Integrated Manufacturing, 34(2015)133–139. http://dx.doi.org/10.1016/j.rcim.2014.12.001
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, "The Tribological and Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel" Ceramic international, 41 (2015) 5387–5396. hhttp://dx.doi.org/10.1016/j.ceramint.2014.12.102
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D. Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand, M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger", Hindawi Publishing Corporation, The Scientific World Journal, The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657 http://www.hindawi.com/journals/tswj/aip/291657/
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan, "Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer using CO2 Laser" ASME, J. Manuf. Sci. Eng. 137(3), 031010 (Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of nickel-based high-strength Inconel 738LC Superalloy with deeper and higher holes quality", Int J Adv Manuf Technol (2016) 82:877–888 http://dx.doi.org/10.1007/s00170-015-7414-6
Ibrahem Maher, Ahmed A.D. Sarhan, M. Hamdi, "Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production" Journal of Cleaner Production 108 (2015) 247-255. http://www.sciencedirect.com/science/article/pii/S0959652615007763
Seyed Reza besharati, Vahid Dabbagh, Ahmed A. D. Sarhan, Jvad akbari, Mohd Hamdi, Zhi Chao Ong, "Multi-objective design and structural optimization of the gantry in a gantry machine tool aimed at improving static, dynamic, light-weight and low-cost performance," Concurrent Engineering: Research and Applications, 2016, Vol. 24(1) 83–93 http://cer.sagepub.com/content/24/1/83
B. Rahmati, Ahmed A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS, "Enhancement of adhesion strength of Tantalum Oxide ceramic thin film coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics International, 41 (2015) 13055 – 13063. http://dx.doi.org/10.1016/j.ceramint.2015.07.090
S. Baradaran, Bahman Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International, 41 (2015) 14157–14164. http://dx.doi.org/10.1016/j.ceramint.2015.07.038
M.A. Ezazi, Farazila Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber Laser technology to weld dissimilar materials: Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux", Materials and Design, 87 (2015) 105–123. http://www.sciencedirect.com/science/article/pii/S0264127515302641
B. Rahmati, Ahmed A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B. W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy for better mechanical properties and biocompatibility enhancement" Ceramics International, 42 (2016) 466–480 http://www.sciencedirect.com/science/article/pii/S0272884215016594
S. Paria, S. Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application", J Therm Anal Calorim (2016) 123:1371–1381 http://link.springer.com/article/10.1007/s10973-015-5006-1
N. Masmiati, Ahmed A. D. Sarhan, M. A. Hassan, M. Hamdi, "Novel Uses of SiO2 Nanolubrication in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High Energy X-ray Diffraction Data" Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230 no. 6, pp.697-708. http://pij.sagepub.com/content/230/6/697
G. Manadis, S. M. Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams", Journal of Intelligent Material Systems and Structures, August 2016 vol. 27 no. 13 1802-1813. http://jim.sagepub.com/content/27/13/1802
Houriyeh Marashi, Ahmed A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2 steel" Applied Surface Science, 357 (2015) 892–907 http://www.sciencedirect.com/science/article/pii/S0169433215021996
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun, "Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for Oil and Gas", Ceramics International, 42 (2016) 3397–3406. http://www.sciencedirect.com/science/article/pii/S0272884215020404
M.A Zavareh, Ahmed A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection evaluation of two new advanced ceramic composites thermal spray coatings Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics International 42 (2016) 5203–5210 http://dx.doi.org/10.1016/j.ceramint.2015.12.044
80- E. Zalnezhad, E. Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability, structural and optical properties investigation of TiO2 nanotubular arrays" Materials Research Bulletin, Volume 78, June 2016, Pages 179–185 http://www.sciencedirect.com/science/article/pii/S0025540816300356
Mahdi Sparham, Ahmed A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting force analysis to estimate the friction force in linear guideways of CNC machine", Measurement 85 (2016) 65–79. http://www.sciencedirect.com/science/article/pii/S0263224116000944
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, "Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel", Measurement 86 (2016) 253–265. http://www.sciencedirect.com/science/article/pii/S0263224116001263
B. Rahmati, Ahmed A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy", Journal of Alloys and Compounds 676 (2016) 369-376. http://www.sciencedirect.com/science/article/pii/S0925838816307721
Ibrahem Maher, Ahmed A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi, "White layer thickness prediction in WEDM using neuro-fuzzy modeling" Transactions of the IMF, 2016, 94:4, 204-210 http://dx.doi.org/10.1080/00202967.2016.1180847
A. Hozoorbakhsh, M. I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran, "An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid Dynamics (CFD)," International Communications in Heat and Mass Transfer 75 (2016) 328–340. ttp://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Houriyeh Marashi, Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the art in powder mixed dielectric for EDM applications", Precision Engineering, Volume 46, October 2016, Pages 11–33. http://www.sciencedirect.com/science/article/pii/S0141635916300691
Houriyeh Marashi, D. M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe plastic deformation to process electrical discharge machining electrodes", Precision engineering, Volume 46, October 2016, Pages 309–322 http://www.sciencedirect.com/science/article/pii/S014163591630071X
H. Amini, Behfar Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, "Sensor-less Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric actuators", ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982
brahem Maher, Ahmed A.D. Sarhan, "Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI 10.1007/s00170-016-9680-3 http://dx.doi.org/10.1007/s00170-016-9680-3
Mehdi Hourmand, Ahmed A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine", Measurement 97 (2017) 64–78. http://www.sciencedirect.com/science/article/pii/S026322411630656X
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti, "Micro-electrode fabrication processes for micro-EDM drilling and milling: A state of the art review", Int J Adv Manuf Technol, 2016, DOI: 10.1007/s00170-016-9671-4.http://dx.doi.org/10.1007/s00170-016-9671-4
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi "Design and experimental evaluation of precise compact tubular ultrasonic motor driven with single phase source", Precision Engineering 48 (2017) 172–180. http://www.sciencedirect.com/science/article/pii/S0141635916303944
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D. Sarhan, H. Amini, "Improving Teleoperation System Performance in the Presence of Estimated External Force", Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93. http://www.sciencedirect.com/science/article/pii/S0736584516301879
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A. Hassan, Ahmed A.D. Sarhan, "Numerical Simulation of Metal Removal in Laser Drilling using Symmetric Smoothed Particle Hydrodynamics" Precision Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.http://www.sciencedirect.com/science/article/pii/S014163591730034X
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A Hassan, Ahmed A.D. Sarhan "Numerical Simulation of Metal Removal in Laser Drilling Using Radial Point Interpolation Method", Engineering Analysis with Boundary Elements, 77 (2017) 89–96. http://www.sciencedirect.com/science/article/pii/S0955799717300401
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti, M. Hamdi "Ultrasonic Assisted Grinding of Advanced Materials for Biomedical and Aerospace Applications-A Review" Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z http://dx.doi.org/10.1007/s00170-017-0316-z
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés "Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals", Ceramics International 43 (2017) 7594–7599 http://doi.org/10.1016/j.ceramint.2017.03.052
M. Z. Ibrahim, Ahmed A.D. Sarhan, F. Yusuf, M. Hamdi, "Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article", Journal of Alloys and Compounds 714 (2017) 636-667. http://dx.doi.org/10.1016/j.jallcom.2017.04.231
M. Sparham, Ahmed A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, "ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system", Journal of Manufacturing Processes 28 (2017) 168–185. http://dx.doi.org/10.1016/j.jmapro.2017.05.020
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Design and manufacturing of Ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area", Measurement 109 (2017) 425–431. http://dx.doi.org/10.1016/j.measurement.2017.06.007
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D. Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta, "Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes", Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0332-z. https://link.springer.com/article/10.1007/s00170-017-0332-z
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N. Nazria, M.A. Omar Awangc, M. A. Hassane, "Numerical Simulation of Metal Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation Method" Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032. https://doi.org/10.1016/j.apm.2017.08.032
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Electromechanical modeling and high speed design of a tubular ultrasonic motor", The international journal of acoustics and vibration, Accepted

ME, KFUPM Bldg 63-Room 303 +966- 13 -860- 2547 +966-13-860 -2949 (ME Dept) ahsarhan@kfupm.edu.sa http://ahmedsarhan.com/

Associate Professor

Education

Ph.D., Precision Engineering, Kyoto University, Kyoto, Japan

M.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

B.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

Courses Taught

Advanced Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
Machine Tool Engineering, 2007-Present
Basic manufacturing processes, 2009-Present
Introduction to Manufacturing Process, 2009-Present
Tool Engineering, 2009-Present
Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
CNC Technology and Programming 2007-2009

Research Areas

Precision Machining and Computer Integrated Manufacturing (CIM)
Cutting Tool Technology
Non-Conventional Machining
Additive manufacturing, Surface Engineering and Coatings

Representative Publications

Patents

Rotating Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011) http://umfacts.um.edu.my/patent/index.php
Intelligent Lubrication System in CNC Machine Linear guide ways for More Precise Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://www.google.com/patents/WO2014081281A2?cl=en
Modified wheelchair with transferring mechanism to assist the wheelchair-bound person (Patent Number: PI 2012004799 – 16-11-2012) http://umfacts.um.edu.my/patent/index.php
Newly nanolubrication system in CNC machining processes for better product quality, more power savings, and less oil consumption and pollution (Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf
Titanium Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof (Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 – 17/5/2016) http://umfacts.um.edu.my/patent/index.php
A new technique for hard anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012). (Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://umfacts.um.edu.my/patent/index.php
Gear backlash compensation mechanism (GBCM) in rack and pinion system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
An Improved Computer Numerically Controlled Gantry Device and Method Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
A Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 – 29/6/2013) http://umfacts.um.edu.my/patent/index.php
A Wheelchair carrier Attachable Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
Molybdenum Disulfide (MoS2) Nanolubrication system in CNC machining applications (PI 2013004641 – 24/12/2013). http://umfacts.um.edu.my/patent/index.php
Horizontal heat exchanger for thermal energy storage technique (PI 2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015) http://www.google.com/patents/WO2015126238A1?cl=en
Ultrasonic motor with new Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
A novel high-pressure fluid jet in grinding process for less wheel loaded areas (PI 2014703299 - 6 November 2014). http://umfacts.um.edu.my/patent/index.php
Thermal spray of Ceramic oxide thin layer coating to enhance wear and corrosion resistance of carbon steel for oil and gas application(PI 2014701851-11 July 2014) http://umfacts.um.edu.my/patent/index.php
Compact and thin ultrasonic motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
Ultrasonic screw pump (USP) for liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing surface quality and product fabrication speed (PI 2015700874-19/03/2015)
Food Decorating System Patent: (PI 2015700957-March 2015)
Method and Apparatus for Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 - 1 February 2016)
An Electrode Wire for Use in Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
An Electric Discharge Machining Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225 - 21 January 2016)
Electrical Discharge Machining Electrode with Lower Wear Rate (Under process)

Representative Publications (Book Chapter)

Ahmed A. D. Sarhan, Atsushi Matsubara (2013) "High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction", "Electrical Engineering and Intelligent Systems (EEIS)": Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, 2013 "Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool" IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51
Erfan Zalnezhad, Ahmed A.D. Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher Fretting Fatigue Life," Transactions on Engineering Technologies - Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22
M. Sayuti1, Ahmed A. D. Sarhan, (2015) "ANFIS Modeling for Higher Machining Performance of Aerospace Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Chapter 39, 2015, pp 551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39
E Zalnezhad, Ahmed AD Sarhan, 2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN: 978-0-08-100203-2, Pages 239
Ibrahem Maher, Ahmed A.D. Sarhana, H. Marashi, "Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process", Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497
Houriyeh Marashi, Ahmed A. D. Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM Capabilities: A Review," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified Fabrication and Measurement Process of Micro-electrode for Micro-EDM of Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM machine," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 267–321, Volume http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, (2016) "Introducing New Coating Material Alloy with Potential Elements for High Corrosion Resistance for Oil and Gas Application", Advances in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN 978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016 under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology

Representative Publications (ISI Journals)

E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface", International Journal of Advanced Manufacturing Technology, January 2013, V(64), Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy", International Journal of Advanced Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "A Fuzzy Logic based Model to Predict surface hardness of thin film TiN Coating on Aerospace AL70751", International Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue 1-4, pp 415-423. http://dx.doi.org/10.1007/s00170-013-4738-y
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application", International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 453-464. http://dx.doi.org/10.1007/s00170-013-4743-1
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system," The International Journal of Advanced Manufacturing Technology, April 2013, V(65), Issue 9-12, pp 1493-1500, (2012). http://www.springerlink.com/content/a36735143468w772/
Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, "The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy," International Journal of Materials Science & Engineering A, 10 January 2013, V(560), PP 377-387. http://dx.doi.org/10.1016/j.msea.2012.09.082
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy," Materials Science & Engineering A, 1 January 2013, V(559), PP 436-446. http://dx.doi.org/10.1016/j.msea.2012.08.123
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel Loading Phenomena" International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 473-485. http://dx.doi.org/10.1007/s00170-013-4745-z
Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, "Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system" International Journal of Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp 505-512. http://www.springerlink.com/content/a3357l71563g2683/
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Prediction of TiN Coating Adhesion Strength on Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System," International Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue 8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
N. Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End Mill" International Journal of Precision Engineering and Manufacturing, December 2012, V(13), No. 12, pp. 2097-2102. http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
A.A. Hamdan, Ahmed A.D. Sarhan, M. Hamdi, "An Optimization Method of the Machining Parameters in High Speed Machining of Stainless Steel Using Coated Carbide Tool for Best Surface Finish", The International Journal of Advanced Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91. http://www.springerlink.com/content/0208j341m335t3t0/
M. Sayuti1, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach" International Journal of Advanced Manufacturing Technology, June 2012, V(60), Issue 9-12, pp 939-950. http://www.springerlink.com/content/37t53v1435471362/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge Chipping in Glass Milling Operation using an Internal CBN Grinding Tool, International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 8, PP: 969-976. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533
Ahmed A. D. Sarhan, Atsushi Matsubara, "Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces," International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
Ahmed A.D. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation and Tool Wear in End-Milling", Journal of Materials Processing Technology, ( 2001), V(109), No.3, pp 229-235. http://www.sciencedirect.com/science/article/pii/S0924013600008037
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System", International Journal of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp 467-473. http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias "Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays," Journal of the Mechanical Behavior of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, "Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics", Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388. http://dx.doi.org/10.1016/j.jmapro.2013.02.004
Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara，Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors", JSME International Journal, Series C, (2006), Vol.49, No.2, pp.307-315.https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article
M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness" Journal of Advanced Materials Research (2010), V(154-155), pp 721-726. http://www.scientific.net/AMR.154-155.721
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach", International Journal of Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp 1153-1164. http://dx.doi.org/10.1007/s00170-013-5093-8
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, "Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature" International Journal of Precision Engineering and Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.http://link.springer.com/article/10.1007%2Fs12541-013-0197-5
M. Sayuti, Ahmed A. D. Sarhan, S. Salem, "Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140" Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi Abd Shukor, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research, 2013, V(748), pp 264-268.http://www.scientific.net/AMR.748.264
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D. Sarhan, "Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application", Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2, pp 785-797. http://dx.doi.org/10.1007/s11661-013-2043-x
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, "A New Method for Determination of Grinding Wheel Loading Using Digital Image Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013) Paper No: MANU-12-1175; Doi: 10.1115/1.4025782 http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
Mahdi Sparham, Ahmed A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an Automated Lubrication Control System in CNC Machine Tool Guideways for More Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol (2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 1143-1155. http://dx.doi.org/10.1007/s00170-013-5334-x
Ahmed A. D. Sarhan, "Investigate the spindle errors motions from thermal change for high precision CNC machining capability", International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 957-963. http://dx.doi.org/10.1007/s00170-013-5339-5
S. Y. Sia, Ahmed A. D. Sarhan, "Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system", Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071. http://dx.doi.org/10.1007/s00170-013-5340-z
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum disulfide (MoS2) Nanolubrication in End Milling Machining" Journal of Cleaner Production, 66 (2014) 685-691. http://www.sciencedirect.com/science/article/pii/S0959652613007403
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi, "A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending Principle Approach" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan, "Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas" International Journal of Advanced Manufacturing Technology, Volume 70, Issue 9 (2014), Page 2233-2240. http://dx.doi.org/10.1007/s00170-013-5471-2
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Farshid Hasani "Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 632–643. http://www.sciencedirect.com/science/article/pii/S0959652613007828
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M. Hamdi "Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299
N. Zalnezhad, Ahmed A. D. Sarhan, "A Fuzzy Logic Predictive Model for Measured Surface Roughness of Ti-TiN Coating on AL7075-T6 Alloy for Longer Fretting Fatigue Life" Measurement, Volume 49, March 2014, Pages 256–265. http://www.sciencedirect.com/science/article/pii/S0263224113005952
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad Zareinejad, Ahmed A. D. Sarhan, "Disturbance Rejection Based Robust Control for Micro Positioning of Piezoelectric Actuators" Comptes Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, "Investigate the Surface Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach", International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1143-1150. http://dx.doi.org/10.1007/s00170-013-5543-3
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan, "Development of SiO2 Nanolubrication System to be Used In Sliding Bearings" International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1277-1284. http://dx.doi.org/10.1007/s00170-013-5566-9
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, "Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption" Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M. Zareinejad, "Continuous dynamic modeling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behavior analysis" Mathematical and Computer Modeling of Dynamical Systems, Volume 21, Issue 2, 2015, pp. 130-152 http://dx.doi.org/10.1080/13873954.2014.906472
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder and More Wear Resistance of Substrate Surface" International Journal of Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12, pp 1491-1502. http://link.springer.com/article/10.1007/s00170-014-5757-z
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A. R. Bushroa, "A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon- Review Paper", Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N. A. Mardi, "Modified Robust External Force Control with Disturbance Rejection with Application to Piezoelectric Actuators" Transactions of the Institute of Measurement and Control, January 2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY,, "Investigate the effect of the machining parameters on the surface quality of machined Brass (60/40) in CNC End-Milling-Automotive application", International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, pp 531-537. http://dx.doi.org/10.1007/s00170-014-6016-z
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun "Plasma thermal spray of ceramic oxide coating layer to enhance wear and corrosion resistance of carbon steel for oil and gas application" Ceramics international, Volume 40, Issue 9, Part A, November 2014, Pages 14267–14277. http://www.sciencedirect.com/science/article/pii/S027288421400889X#
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation System without Force Sensor", J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587. http://link.springer.com/article/10.1007/s40430-014-0207-2
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D. Sarhan, "Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings", Ceramics international, Volume 40, Issue 10, Part A, December 2014, Pages 15603–15615. http://www.sciencedirect.com/science/article/pii/S0272884214011018
Saeid Baradaran, Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D. Sarhan, Y. Alias, "Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V", Surface and Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990. http://www.sciencedirect.com/science/article/pii/S0257897214006458
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi, "Review on improvement of wire electrodes properties for higher working time and utilization in Wire EDM machining" International Journal of Advanced Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351. http://dx.doi.org/10.1007/s00170-014-6243-3
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill," Advances in Materials Science and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267. http://www.hindawi.com/journals/amse/aip/485267/
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa, "Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy Rule Based Approach" Tribology Transactions Volume 58, Issue 2, pp. 240-246, 2015. http://dx.doi.org/10.1080/10402004.2014.962205
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, "Cutting force based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining", International Journal of Advanced Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467. http://dx.doi.org/10.1007/s00170-014-6379-1
H.Amini, S.M. Rezaei, Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi "Transparency Improvement by External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation System", ASME, Journal of Dynamic Systems, Measurement and Control, 137(5), 051013 (May 01, 2015) (15 pages). http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing Cutting Parameters in Inclined End Milling for Minimum Surface Residual Stress - Taguchi Approach" Measurement, Volume 60, January 2015, Pages 267–275. http://www.sciencedirect.com/science/article/pii/S0263224114004667
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D. Sarhan, S. Ramesh, H. M. Khanlou, "Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning" Measurement, Volume 61, February 2015, Pages 150–161. http://www.sciencedirect.com/science/article/pii/S0263224114004679
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan, Noording Mohd Yusof, "Investigating the Electrical Discharge Machining (EDM) Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material Removal Rate (MRR) and Less TWR - RSM Approach", Int. J Adv Manuf. Technol. (2015) 77: 831–838. http://dx.doi.org/10.1007/s00170-014-6491-2
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed Farahany, Ramesh Singh, Ibrahim Maher, "Machinability of Al-Si-Cu cast alloy containing bismuth and antimony when dry turning using coated carbide insert" Measurement, Volume 62, February 2015, Pages 170–178. http://dx.doi.org/10.1016/j.measurement.2014.10.030
Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md NizamAbd Wahab, "Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy" Measurement, Volume 61, February 2015, Pages 39–50. http://www.sciencedirect.com/science/article/pii/S0263224114004941#
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of Aerospace AL tempered grade 6061" Journal of Cleaner Production, Volume 89, 15 February 2015, Pages 286–295. http://www.sciencedirect.com/science/article/pii/S0959652614011767
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, "Nonlinear dynamic analysis of a new anti-backlash gear mechanism design for reducing dynamic transmission error," ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648
Ahmed A. D. Sarhan, A. Matsubara "Investigate the Characterization of Machine Tool Spindle Stiffness for Intelligent CNC Machining", Robotics and Computer-Integrated Manufacturing, 34(2015)133–139. http://dx.doi.org/10.1016/j.rcim.2014.12.001
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, "The Tribological and Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel" Ceramic international, 41 (2015) 5387–5396. hhttp://dx.doi.org/10.1016/j.ceramint.2014.12.102
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D. Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand, M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger", Hindawi Publishing Corporation, The Scientific World Journal, The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657 http://www.hindawi.com/journals/tswj/aip/291657/
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan, "Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer using CO2 Laser" ASME, J. Manuf. Sci. Eng. 137(3), 031010 (Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of nickel-based high-strength Inconel 738LC Superalloy with deeper and higher holes quality", Int J Adv Manuf Technol (2016) 82:877–888 http://dx.doi.org/10.1007/s00170-015-7414-6
Ibrahem Maher, Ahmed A.D. Sarhan, M. Hamdi, "Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production" Journal of Cleaner Production 108 (2015) 247-255. http://www.sciencedirect.com/science/article/pii/S0959652615007763
Seyed Reza besharati, Vahid Dabbagh, Ahmed A. D. Sarhan, Jvad akbari, Mohd Hamdi, Zhi Chao Ong, "Multi-objective design and structural optimization of the gantry in a gantry machine tool aimed at improving static, dynamic, light-weight and low-cost performance," Concurrent Engineering: Research and Applications, 2016, Vol. 24(1) 83–93 http://cer.sagepub.com/content/24/1/83
B. Rahmati, Ahmed A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS, "Enhancement of adhesion strength of Tantalum Oxide ceramic thin film coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics International, 41 (2015) 13055 – 13063. http://dx.doi.org/10.1016/j.ceramint.2015.07.090
S. Baradaran, Bahman Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International, 41 (2015) 14157–14164. http://dx.doi.org/10.1016/j.ceramint.2015.07.038
M.A. Ezazi, Farazila Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber Laser technology to weld dissimilar materials: Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux", Materials and Design, 87 (2015) 105–123. http://www.sciencedirect.com/science/article/pii/S0264127515302641
B. Rahmati, Ahmed A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B. W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy for better mechanical properties and biocompatibility enhancement" Ceramics International, 42 (2016) 466–480 http://www.sciencedirect.com/science/article/pii/S0272884215016594
S. Paria, S. Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application", J Therm Anal Calorim (2016) 123:1371–1381 http://link.springer.com/article/10.1007/s10973-015-5006-1
N. Masmiati, Ahmed A. D. Sarhan, M. A. Hassan, M. Hamdi, "Novel Uses of SiO2 Nanolubrication in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High Energy X-ray Diffraction Data" Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230 no. 6, pp.697-708. http://pij.sagepub.com/content/230/6/697
G. Manadis, S. M. Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams", Journal of Intelligent Material Systems and Structures, August 2016 vol. 27 no. 13 1802-1813. http://jim.sagepub.com/content/27/13/1802
Houriyeh Marashi, Ahmed A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2 steel" Applied Surface Science, 357 (2015) 892–907 http://www.sciencedirect.com/science/article/pii/S0169433215021996
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun, "Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for Oil and Gas", Ceramics International, 42 (2016) 3397–3406. http://www.sciencedirect.com/science/article/pii/S0272884215020404
M.A Zavareh, Ahmed A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection evaluation of two new advanced ceramic composites thermal spray coatings Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics International 42 (2016) 5203–5210 http://dx.doi.org/10.1016/j.ceramint.2015.12.044
80- E. Zalnezhad, E. Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability, structural and optical properties investigation of TiO2 nanotubular arrays" Materials Research Bulletin, Volume 78, June 2016, Pages 179–185 http://www.sciencedirect.com/science/article/pii/S0025540816300356
Mahdi Sparham, Ahmed A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting force analysis to estimate the friction force in linear guideways of CNC machine", Measurement 85 (2016) 65–79. http://www.sciencedirect.com/science/article/pii/S0263224116000944
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, "Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel", Measurement 86 (2016) 253–265. http://www.sciencedirect.com/science/article/pii/S0263224116001263
B. Rahmati, Ahmed A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy", Journal of Alloys and Compounds 676 (2016) 369-376. http://www.sciencedirect.com/science/article/pii/S0925838816307721
Ibrahem Maher, Ahmed A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi, "White layer thickness prediction in WEDM using neuro-fuzzy modeling" Transactions of the IMF, 2016, 94:4, 204-210 http://dx.doi.org/10.1080/00202967.2016.1180847
A. Hozoorbakhsh, M. I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran, "An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid Dynamics (CFD)," International Communications in Heat and Mass Transfer 75 (2016) 328–340. ttp://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Houriyeh Marashi, Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the art in powder mixed dielectric for EDM applications", Precision Engineering, Volume 46, October 2016, Pages 11–33. http://www.sciencedirect.com/science/article/pii/S0141635916300691
Houriyeh Marashi, D. M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe plastic deformation to process electrical discharge machining electrodes", Precision engineering, Volume 46, October 2016, Pages 309–322 http://www.sciencedirect.com/science/article/pii/S014163591630071X
H. Amini, Behfar Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, "Sensor-less Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric actuators", ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982
brahem Maher, Ahmed A.D. Sarhan, "Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI 10.1007/s00170-016-9680-3 http://dx.doi.org/10.1007/s00170-016-9680-3
Mehdi Hourmand, Ahmed A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine", Measurement 97 (2017) 64–78. http://www.sciencedirect.com/science/article/pii/S026322411630656X
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti, "Micro-electrode fabrication processes for micro-EDM drilling and milling: A state of the art review", Int J Adv Manuf Technol, 2016, DOI: 10.1007/s00170-016-9671-4.http://dx.doi.org/10.1007/s00170-016-9671-4
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi "Design and experimental evaluation of precise compact tubular ultrasonic motor driven with single phase source", Precision Engineering 48 (2017) 172–180. http://www.sciencedirect.com/science/article/pii/S0141635916303944
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D. Sarhan, H. Amini, "Improving Teleoperation System Performance in the Presence of Estimated External Force", Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93. http://www.sciencedirect.com/science/article/pii/S0736584516301879
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A. Hassan, Ahmed A.D. Sarhan, "Numerical Simulation of Metal Removal in Laser Drilling using Symmetric Smoothed Particle Hydrodynamics" Precision Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.http://www.sciencedirect.com/science/article/pii/S014163591730034X
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A Hassan, Ahmed A.D. Sarhan "Numerical Simulation of Metal Removal in Laser Drilling Using Radial Point Interpolation Method", Engineering Analysis with Boundary Elements, 77 (2017) 89–96. http://www.sciencedirect.com/science/article/pii/S0955799717300401
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti, M. Hamdi "Ultrasonic Assisted Grinding of Advanced Materials for Biomedical and Aerospace Applications-A Review" Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z http://dx.doi.org/10.1007/s00170-017-0316-z
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés "Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals", Ceramics International 43 (2017) 7594–7599 http://doi.org/10.1016/j.ceramint.2017.03.052
M. Z. Ibrahim, Ahmed A.D. Sarhan, F. Yusuf, M. Hamdi, "Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article", Journal of Alloys and Compounds 714 (2017) 636-667. http://dx.doi.org/10.1016/j.jallcom.2017.04.231
M. Sparham, Ahmed A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, "ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system", Journal of Manufacturing Processes 28 (2017) 168–185. http://dx.doi.org/10.1016/j.jmapro.2017.05.020
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Design and manufacturing of Ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area", Measurement 109 (2017) 425–431. http://dx.doi.org/10.1016/j.measurement.2017.06.007
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D. Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta, "Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes", Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0332-z. https://link.springer.com/article/10.1007/s00170-017-0332-z
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N. Nazria, M.A. Omar Awangc, M. A. Hassane, "Numerical Simulation of Metal Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation Method" Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032. https://doi.org/10.1016/j.apm.2017.08.032
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Electromechanical modeling and high speed design of a tubular ultrasonic motor", The international journal of acoustics and vibration, Accepted

ME, KFUPM Bldg 63-Room 303 +966- 13 -860- 2547 +966-13-860 -2949 (ME Dept) ahsarhan@kfupm.edu.sa http://ahmedsarhan.com/

Assistant Professor

Education

Ph.D., Precision Engineering, Kyoto University, Kyoto, Japan

M.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

B.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

Courses Taught

Advanced Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
Machine Tool Engineering, 2007-Present
Basic manufacturing processes, 2009-Present
Introduction to Manufacturing Process, 2009-Present
Tool Engineering, 2009-Present
Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
CNC Technology and Programming 2007-2009

Research Areas

Precision Machining and Computer Integrated Manufacturing (CIM)
Cutting Tool Technology
Non-Conventional Machining
Additive manufacturing, Surface Engineering and Coatings

Representative Publications

Patents

Rotating Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011) http://umfacts.um.edu.my/patent/index.php
Intelligent Lubrication System in CNC Machine Linear guide ways for More Precise Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://www.google.com/patents/WO2014081281A2?cl=en
Modified wheelchair with transferring mechanism to assist the wheelchair-bound person (Patent Number: PI 2012004799 – 16-11-2012) http://umfacts.um.edu.my/patent/index.php
Newly nanolubrication system in CNC machining processes for better product quality, more power savings, and less oil consumption and pollution (Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf
Titanium Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof (Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 – 17/5/2016) http://umfacts.um.edu.my/patent/index.php
A new technique for hard anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012). (Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://umfacts.um.edu.my/patent/index.php
Gear backlash compensation mechanism (GBCM) in rack and pinion system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
An Improved Computer Numerically Controlled Gantry Device and Method Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
A Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 – 29/6/2013) http://umfacts.um.edu.my/patent/index.php
A Wheelchair carrier Attachable Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
Molybdenum Disulfide (MoS2) Nanolubrication system in CNC machining applications (PI 2013004641 – 24/12/2013). http://umfacts.um.edu.my/patent/index.php
Horizontal heat exchanger for thermal energy storage technique (PI 2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015) http://www.google.com/patents/WO2015126238A1?cl=en
Ultrasonic motor with new Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
A novel high-pressure fluid jet in grinding process for less wheel loaded areas (PI 2014703299 - 6 November 2014). http://umfacts.um.edu.my/patent/index.php
Thermal spray of Ceramic oxide thin layer coating to enhance wear and corrosion resistance of carbon steel for oil and gas application(PI 2014701851-11 July 2014) http://umfacts.um.edu.my/patent/index.php
Compact and thin ultrasonic motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
Ultrasonic screw pump (USP) for liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing surface quality and product fabrication speed (PI 2015700874-19/03/2015)
Food Decorating System Patent: (PI 2015700957-March 2015)
Method and Apparatus for Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 - 1 February 2016)
An Electrode Wire for Use in Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
An Electric Discharge Machining Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225 - 21 January 2016)
Electrical Discharge Machining Electrode with Lower Wear Rate (Under process)

Representative Publications (Book Chapter)

Ahmed A. D. Sarhan, Atsushi Matsubara (2013) "High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction", "Electrical Engineering and Intelligent Systems (EEIS)": Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, 2013 "Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool" IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51
Erfan Zalnezhad, Ahmed A.D. Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher Fretting Fatigue Life," Transactions on Engineering Technologies - Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22
M. Sayuti1, Ahmed A. D. Sarhan, (2015) "ANFIS Modeling for Higher Machining Performance of Aerospace Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Chapter 39, 2015, pp 551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39
E Zalnezhad, Ahmed AD Sarhan, 2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN: 978-0-08-100203-2, Pages 239
Ibrahem Maher, Ahmed A.D. Sarhana, H. Marashi, "Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process", Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497
Houriyeh Marashi, Ahmed A. D. Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM Capabilities: A Review," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified Fabrication and Measurement Process of Micro-electrode for Micro-EDM of Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM machine," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 267–321, Volume http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, (2016) "Introducing New Coating Material Alloy with Potential Elements for High Corrosion Resistance for Oil and Gas Application", Advances in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN 978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016 under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology

Representative Publications (ISI Journals)

E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface", International Journal of Advanced Manufacturing Technology, January 2013, V(64), Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy", International Journal of Advanced Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "A Fuzzy Logic based Model to Predict surface hardness of thin film TiN Coating on Aerospace AL70751", International Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue 1-4, pp 415-423. http://dx.doi.org/10.1007/s00170-013-4738-y
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application", International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 453-464. http://dx.doi.org/10.1007/s00170-013-4743-1
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system," The International Journal of Advanced Manufacturing Technology, April 2013, V(65), Issue 9-12, pp 1493-1500, (2012). http://www.springerlink.com/content/a36735143468w772/
Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, "The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy," International Journal of Materials Science & Engineering A, 10 January 2013, V(560), PP 377-387. http://dx.doi.org/10.1016/j.msea.2012.09.082
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy," Materials Science & Engineering A, 1 January 2013, V(559), PP 436-446. http://dx.doi.org/10.1016/j.msea.2012.08.123
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel Loading Phenomena" International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 473-485. http://dx.doi.org/10.1007/s00170-013-4745-z
Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, "Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system" International Journal of Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp 505-512. http://www.springerlink.com/content/a3357l71563g2683/
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Prediction of TiN Coating Adhesion Strength on Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System," International Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue 8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
N. Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End Mill" International Journal of Precision Engineering and Manufacturing, December 2012, V(13), No. 12, pp. 2097-2102. http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
A.A. Hamdan, Ahmed A.D. Sarhan, M. Hamdi, "An Optimization Method of the Machining Parameters in High Speed Machining of Stainless Steel Using Coated Carbide Tool for Best Surface Finish", The International Journal of Advanced Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91. http://www.springerlink.com/content/0208j341m335t3t0/
M. Sayuti1, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach" International Journal of Advanced Manufacturing Technology, June 2012, V(60), Issue 9-12, pp 939-950. http://www.springerlink.com/content/37t53v1435471362/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge Chipping in Glass Milling Operation using an Internal CBN Grinding Tool, International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 8, PP: 969-976. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533
Ahmed A. D. Sarhan, Atsushi Matsubara, "Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces," International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
Ahmed A.D. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation and Tool Wear in End-Milling", Journal of Materials Processing Technology, ( 2001), V(109), No.3, pp 229-235. http://www.sciencedirect.com/science/article/pii/S0924013600008037
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System", International Journal of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp 467-473. http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias "Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays," Journal of the Mechanical Behavior of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, "Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics", Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388. http://dx.doi.org/10.1016/j.jmapro.2013.02.004
Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara，Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors", JSME International Journal, Series C, (2006), Vol.49, No.2, pp.307-315.https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article
M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness" Journal of Advanced Materials Research (2010), V(154-155), pp 721-726. http://www.scientific.net/AMR.154-155.721
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach", International Journal of Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp 1153-1164. http://dx.doi.org/10.1007/s00170-013-5093-8
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, "Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature" International Journal of Precision Engineering and Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.http://link.springer.com/article/10.1007%2Fs12541-013-0197-5
M. Sayuti, Ahmed A. D. Sarhan, S. Salem, "Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140" Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi Abd Shukor, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research, 2013, V(748), pp 264-268.http://www.scientific.net/AMR.748.264
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D. Sarhan, "Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application", Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2, pp 785-797. http://dx.doi.org/10.1007/s11661-013-2043-x
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, "A New Method for Determination of Grinding Wheel Loading Using Digital Image Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013) Paper No: MANU-12-1175; Doi: 10.1115/1.4025782 http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
Mahdi Sparham, Ahmed A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an Automated Lubrication Control System in CNC Machine Tool Guideways for More Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol (2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 1143-1155. http://dx.doi.org/10.1007/s00170-013-5334-x
Ahmed A. D. Sarhan, "Investigate the spindle errors motions from thermal change for high precision CNC machining capability", International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 957-963. http://dx.doi.org/10.1007/s00170-013-5339-5
S. Y. Sia, Ahmed A. D. Sarhan, "Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system", Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071. http://dx.doi.org/10.1007/s00170-013-5340-z
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum disulfide (MoS2) Nanolubrication in End Milling Machining" Journal of Cleaner Production, 66 (2014) 685-691. http://www.sciencedirect.com/science/article/pii/S0959652613007403
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi, "A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending Principle Approach" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan, "Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas" International Journal of Advanced Manufacturing Technology, Volume 70, Issue 9 (2014), Page 2233-2240. http://dx.doi.org/10.1007/s00170-013-5471-2
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Farshid Hasani "Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 632–643. http://www.sciencedirect.com/science/article/pii/S0959652613007828
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M. Hamdi "Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299
N. Zalnezhad, Ahmed A. D. Sarhan, "A Fuzzy Logic Predictive Model for Measured Surface Roughness of Ti-TiN Coating on AL7075-T6 Alloy for Longer Fretting Fatigue Life" Measurement, Volume 49, March 2014, Pages 256–265. http://www.sciencedirect.com/science/article/pii/S0263224113005952
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad Zareinejad, Ahmed A. D. Sarhan, "Disturbance Rejection Based Robust Control for Micro Positioning of Piezoelectric Actuators" Comptes Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, "Investigate the Surface Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach", International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1143-1150. http://dx.doi.org/10.1007/s00170-013-5543-3
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan, "Development of SiO2 Nanolubrication System to be Used In Sliding Bearings" International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1277-1284. http://dx.doi.org/10.1007/s00170-013-5566-9
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, "Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption" Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M. Zareinejad, "Continuous dynamic modeling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behavior analysis" Mathematical and Computer Modeling of Dynamical Systems, Volume 21, Issue 2, 2015, pp. 130-152 http://dx.doi.org/10.1080/13873954.2014.906472
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder and More Wear Resistance of Substrate Surface" International Journal of Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12, pp 1491-1502. http://link.springer.com/article/10.1007/s00170-014-5757-z
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A. R. Bushroa, "A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon- Review Paper", Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N. A. Mardi, "Modified Robust External Force Control with Disturbance Rejection with Application to Piezoelectric Actuators" Transactions of the Institute of Measurement and Control, January 2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY,, "Investigate the effect of the machining parameters on the surface quality of machined Brass (60/40) in CNC End-Milling-Automotive application", International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, pp 531-537. http://dx.doi.org/10.1007/s00170-014-6016-z
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun "Plasma thermal spray of ceramic oxide coating layer to enhance wear and corrosion resistance of carbon steel for oil and gas application" Ceramics international, Volume 40, Issue 9, Part A, November 2014, Pages 14267–14277. http://www.sciencedirect.com/science/article/pii/S027288421400889X#
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation System without Force Sensor", J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587. http://link.springer.com/article/10.1007/s40430-014-0207-2
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D. Sarhan, "Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings", Ceramics international, Volume 40, Issue 10, Part A, December 2014, Pages 15603–15615. http://www.sciencedirect.com/science/article/pii/S0272884214011018
Saeid Baradaran, Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D. Sarhan, Y. Alias, "Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V", Surface and Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990. http://www.sciencedirect.com/science/article/pii/S0257897214006458
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi, "Review on improvement of wire electrodes properties for higher working time and utilization in Wire EDM machining" International Journal of Advanced Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351. http://dx.doi.org/10.1007/s00170-014-6243-3
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill," Advances in Materials Science and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267. http://www.hindawi.com/journals/amse/aip/485267/
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa, "Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy Rule Based Approach" Tribology Transactions Volume 58, Issue 2, pp. 240-246, 2015. http://dx.doi.org/10.1080/10402004.2014.962205
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, "Cutting force based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining", International Journal of Advanced Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467. http://dx.doi.org/10.1007/s00170-014-6379-1
H.Amini, S.M. Rezaei, Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi "Transparency Improvement by External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation System", ASME, Journal of Dynamic Systems, Measurement and Control, 137(5), 051013 (May 01, 2015) (15 pages). http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing Cutting Parameters in Inclined End Milling for Minimum Surface Residual Stress - Taguchi Approach" Measurement, Volume 60, January 2015, Pages 267–275. http://www.sciencedirect.com/science/article/pii/S0263224114004667
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D. Sarhan, S. Ramesh, H. M. Khanlou, "Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning" Measurement, Volume 61, February 2015, Pages 150–161. http://www.sciencedirect.com/science/article/pii/S0263224114004679
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan, Noording Mohd Yusof, "Investigating the Electrical Discharge Machining (EDM) Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material Removal Rate (MRR) and Less TWR - RSM Approach", Int. J Adv Manuf. Technol. (2015) 77: 831–838. http://dx.doi.org/10.1007/s00170-014-6491-2
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed Farahany, Ramesh Singh, Ibrahim Maher, "Machinability of Al-Si-Cu cast alloy containing bismuth and antimony when dry turning using coated carbide insert" Measurement, Volume 62, February 2015, Pages 170–178. http://dx.doi.org/10.1016/j.measurement.2014.10.030
Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md NizamAbd Wahab, "Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy" Measurement, Volume 61, February 2015, Pages 39–50. http://www.sciencedirect.com/science/article/pii/S0263224114004941#
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of Aerospace AL tempered grade 6061" Journal of Cleaner Production, Volume 89, 15 February 2015, Pages 286–295. http://www.sciencedirect.com/science/article/pii/S0959652614011767
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, "Nonlinear dynamic analysis of a new anti-backlash gear mechanism design for reducing dynamic transmission error," ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648
Ahmed A. D. Sarhan, A. Matsubara "Investigate the Characterization of Machine Tool Spindle Stiffness for Intelligent CNC Machining", Robotics and Computer-Integrated Manufacturing, 34(2015)133–139. http://dx.doi.org/10.1016/j.rcim.2014.12.001
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, "The Tribological and Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel" Ceramic international, 41 (2015) 5387–5396. hhttp://dx.doi.org/10.1016/j.ceramint.2014.12.102
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D. Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand, M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger", Hindawi Publishing Corporation, The Scientific World Journal, The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657 http://www.hindawi.com/journals/tswj/aip/291657/
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan, "Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer using CO2 Laser" ASME, J. Manuf. Sci. Eng. 137(3), 031010 (Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of nickel-based high-strength Inconel 738LC Superalloy with deeper and higher holes quality", Int J Adv Manuf Technol (2016) 82:877–888 http://dx.doi.org/10.1007/s00170-015-7414-6
Ibrahem Maher, Ahmed A.D. Sarhan, M. Hamdi, "Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production" Journal of Cleaner Production 108 (2015) 247-255. http://www.sciencedirect.com/science/article/pii/S0959652615007763
Seyed Reza besharati, Vahid Dabbagh, Ahmed A. D. Sarhan, Jvad akbari, Mohd Hamdi, Zhi Chao Ong, "Multi-objective design and structural optimization of the gantry in a gantry machine tool aimed at improving static, dynamic, light-weight and low-cost performance," Concurrent Engineering: Research and Applications, 2016, Vol. 24(1) 83–93 http://cer.sagepub.com/content/24/1/83
B. Rahmati, Ahmed A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS, "Enhancement of adhesion strength of Tantalum Oxide ceramic thin film coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics International, 41 (2015) 13055 – 13063. http://dx.doi.org/10.1016/j.ceramint.2015.07.090
S. Baradaran, Bahman Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International, 41 (2015) 14157–14164. http://dx.doi.org/10.1016/j.ceramint.2015.07.038
M.A. Ezazi, Farazila Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber Laser technology to weld dissimilar materials: Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux", Materials and Design, 87 (2015) 105–123. http://www.sciencedirect.com/science/article/pii/S0264127515302641
B. Rahmati, Ahmed A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B. W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy for better mechanical properties and biocompatibility enhancement" Ceramics International, 42 (2016) 466–480 http://www.sciencedirect.com/science/article/pii/S0272884215016594
S. Paria, S. Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application", J Therm Anal Calorim (2016) 123:1371–1381 http://link.springer.com/article/10.1007/s10973-015-5006-1
N. Masmiati, Ahmed A. D. Sarhan, M. A. Hassan, M. Hamdi, "Novel Uses of SiO2 Nanolubrication in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High Energy X-ray Diffraction Data" Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230 no. 6, pp.697-708. http://pij.sagepub.com/content/230/6/697
G. Manadis, S. M. Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams", Journal of Intelligent Material Systems and Structures, August 2016 vol. 27 no. 13 1802-1813. http://jim.sagepub.com/content/27/13/1802
Houriyeh Marashi, Ahmed A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2 steel" Applied Surface Science, 357 (2015) 892–907 http://www.sciencedirect.com/science/article/pii/S0169433215021996
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun, "Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for Oil and Gas", Ceramics International, 42 (2016) 3397–3406. http://www.sciencedirect.com/science/article/pii/S0272884215020404
M.A Zavareh, Ahmed A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection evaluation of two new advanced ceramic composites thermal spray coatings Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics International 42 (2016) 5203–5210 http://dx.doi.org/10.1016/j.ceramint.2015.12.044
80- E. Zalnezhad, E. Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability, structural and optical properties investigation of TiO2 nanotubular arrays" Materials Research Bulletin, Volume 78, June 2016, Pages 179–185 http://www.sciencedirect.com/science/article/pii/S0025540816300356
Mahdi Sparham, Ahmed A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting force analysis to estimate the friction force in linear guideways of CNC machine", Measurement 85 (2016) 65–79. http://www.sciencedirect.com/science/article/pii/S0263224116000944
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, "Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel", Measurement 86 (2016) 253–265. http://www.sciencedirect.com/science/article/pii/S0263224116001263
B. Rahmati, Ahmed A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy", Journal of Alloys and Compounds 676 (2016) 369-376. http://www.sciencedirect.com/science/article/pii/S0925838816307721
Ibrahem Maher, Ahmed A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi, "White layer thickness prediction in WEDM using neuro-fuzzy modeling" Transactions of the IMF, 2016, 94:4, 204-210 http://dx.doi.org/10.1080/00202967.2016.1180847
A. Hozoorbakhsh, M. I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran, "An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid Dynamics (CFD)," International Communications in Heat and Mass Transfer 75 (2016) 328–340. ttp://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Houriyeh Marashi, Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the art in powder mixed dielectric for EDM applications", Precision Engineering, Volume 46, October 2016, Pages 11–33. http://www.sciencedirect.com/science/article/pii/S0141635916300691
Houriyeh Marashi, D. M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe plastic deformation to process electrical discharge machining electrodes", Precision engineering, Volume 46, October 2016, Pages 309–322 http://www.sciencedirect.com/science/article/pii/S014163591630071X
H. Amini, Behfar Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, "Sensor-less Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric actuators", ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982
brahem Maher, Ahmed A.D. Sarhan, "Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI 10.1007/s00170-016-9680-3 http://dx.doi.org/10.1007/s00170-016-9680-3
Mehdi Hourmand, Ahmed A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine", Measurement 97 (2017) 64–78. http://www.sciencedirect.com/science/article/pii/S026322411630656X
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti, "Micro-electrode fabrication processes for micro-EDM drilling and milling: A state of the art review", Int J Adv Manuf Technol, 2016, DOI: 10.1007/s00170-016-9671-4.http://dx.doi.org/10.1007/s00170-016-9671-4
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi "Design and experimental evaluation of precise compact tubular ultrasonic motor driven with single phase source", Precision Engineering 48 (2017) 172–180. http://www.sciencedirect.com/science/article/pii/S0141635916303944
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D. Sarhan, H. Amini, "Improving Teleoperation System Performance in the Presence of Estimated External Force", Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93. http://www.sciencedirect.com/science/article/pii/S0736584516301879
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A. Hassan, Ahmed A.D. Sarhan, "Numerical Simulation of Metal Removal in Laser Drilling using Symmetric Smoothed Particle Hydrodynamics" Precision Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.http://www.sciencedirect.com/science/article/pii/S014163591730034X
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A Hassan, Ahmed A.D. Sarhan "Numerical Simulation of Metal Removal in Laser Drilling Using Radial Point Interpolation Method", Engineering Analysis with Boundary Elements, 77 (2017) 89–96. http://www.sciencedirect.com/science/article/pii/S0955799717300401
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti, M. Hamdi "Ultrasonic Assisted Grinding of Advanced Materials for Biomedical and Aerospace Applications-A Review" Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z http://dx.doi.org/10.1007/s00170-017-0316-z
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés "Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals", Ceramics International 43 (2017) 7594–7599 http://doi.org/10.1016/j.ceramint.2017.03.052
M. Z. Ibrahim, Ahmed A.D. Sarhan, F. Yusuf, M. Hamdi, "Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article", Journal of Alloys and Compounds 714 (2017) 636-667. http://dx.doi.org/10.1016/j.jallcom.2017.04.231
M. Sparham, Ahmed A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, "ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system", Journal of Manufacturing Processes 28 (2017) 168–185. http://dx.doi.org/10.1016/j.jmapro.2017.05.020
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Design and manufacturing of Ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area", Measurement 109 (2017) 425–431. http://dx.doi.org/10.1016/j.measurement.2017.06.007
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D. Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta, "Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes", Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0332-z. https://link.springer.com/article/10.1007/s00170-017-0332-z
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N. Nazria, M.A. Omar Awangc, M. A. Hassane, "Numerical Simulation of Metal Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation Method" Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032. https://doi.org/10.1016/j.apm.2017.08.032
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Electromechanical modeling and high speed design of a tubular ultrasonic motor", The international journal of acoustics and vibration, Accepted

ME, KFUPM Bldg 63-Room 303 +966- 13 -860- 2547 +966-13-860 -2949 (ME Dept) ahsarhan@kfupm.edu.sa http://ahmedsarhan.com/

Lecturer

Education

Ph.D., Precision Engineering, Kyoto University, Kyoto, Japan

M.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

B.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

Courses Taught

Advanced Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
Machine Tool Engineering, 2007-Present
Basic manufacturing processes, 2009-Present
Introduction to Manufacturing Process, 2009-Present
Tool Engineering, 2009-Present
Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
CNC Technology and Programming 2007-2009

Research Areas

Precision Machining and Computer Integrated Manufacturing (CIM)
Cutting Tool Technology
Non-Conventional Machining
Additive manufacturing, Surface Engineering and Coatings

Representative Publications

Patents

Rotating Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011) http://umfacts.um.edu.my/patent/index.php
Intelligent Lubrication System in CNC Machine Linear guide ways for More Precise Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://www.google.com/patents/WO2014081281A2?cl=en
Modified wheelchair with transferring mechanism to assist the wheelchair-bound person (Patent Number: PI 2012004799 – 16-11-2012) http://umfacts.um.edu.my/patent/index.php
Newly nanolubrication system in CNC machining processes for better product quality, more power savings, and less oil consumption and pollution (Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf
Titanium Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof (Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 – 17/5/2016) http://umfacts.um.edu.my/patent/index.php
A new technique for hard anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012). (Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://umfacts.um.edu.my/patent/index.php
Gear backlash compensation mechanism (GBCM) in rack and pinion system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
An Improved Computer Numerically Controlled Gantry Device and Method Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
A Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 – 29/6/2013) http://umfacts.um.edu.my/patent/index.php
A Wheelchair carrier Attachable Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
Molybdenum Disulfide (MoS2) Nanolubrication system in CNC machining applications (PI 2013004641 – 24/12/2013). http://umfacts.um.edu.my/patent/index.php
Horizontal heat exchanger for thermal energy storage technique (PI 2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015) http://www.google.com/patents/WO2015126238A1?cl=en
Ultrasonic motor with new Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
A novel high-pressure fluid jet in grinding process for less wheel loaded areas (PI 2014703299 - 6 November 2014). http://umfacts.um.edu.my/patent/index.php
Thermal spray of Ceramic oxide thin layer coating to enhance wear and corrosion resistance of carbon steel for oil and gas application(PI 2014701851-11 July 2014) http://umfacts.um.edu.my/patent/index.php
Compact and thin ultrasonic motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
Ultrasonic screw pump (USP) for liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing surface quality and product fabrication speed (PI 2015700874-19/03/2015)
Food Decorating System Patent: (PI 2015700957-March 2015)
Method and Apparatus for Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 - 1 February 2016)
An Electrode Wire for Use in Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
An Electric Discharge Machining Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225 - 21 January 2016)
Electrical Discharge Machining Electrode with Lower Wear Rate (Under process)

Representative Publications (Book Chapter)

Ahmed A. D. Sarhan, Atsushi Matsubara (2013) "High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction", "Electrical Engineering and Intelligent Systems (EEIS)": Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, 2013 "Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool" IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51
Erfan Zalnezhad, Ahmed A.D. Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher Fretting Fatigue Life," Transactions on Engineering Technologies - Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22
M. Sayuti1, Ahmed A. D. Sarhan, (2015) "ANFIS Modeling for Higher Machining Performance of Aerospace Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Chapter 39, 2015, pp 551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39
E Zalnezhad, Ahmed AD Sarhan, 2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN: 978-0-08-100203-2, Pages 239
Ibrahem Maher, Ahmed A.D. Sarhana, H. Marashi, "Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process", Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497
Houriyeh Marashi, Ahmed A. D. Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM Capabilities: A Review," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified Fabrication and Measurement Process of Micro-electrode for Micro-EDM of Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM machine," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 267–321, Volume http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, (2016) "Introducing New Coating Material Alloy with Potential Elements for High Corrosion Resistance for Oil and Gas Application", Advances in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN 978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016 under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology

Representative Publications (ISI Journals)

E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface", International Journal of Advanced Manufacturing Technology, January 2013, V(64), Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy", International Journal of Advanced Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "A Fuzzy Logic based Model to Predict surface hardness of thin film TiN Coating on Aerospace AL70751", International Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue 1-4, pp 415-423. http://dx.doi.org/10.1007/s00170-013-4738-y
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application", International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 453-464. http://dx.doi.org/10.1007/s00170-013-4743-1
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system," The International Journal of Advanced Manufacturing Technology, April 2013, V(65), Issue 9-12, pp 1493-1500, (2012). http://www.springerlink.com/content/a36735143468w772/
Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, "The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy," International Journal of Materials Science & Engineering A, 10 January 2013, V(560), PP 377-387. http://dx.doi.org/10.1016/j.msea.2012.09.082
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy," Materials Science & Engineering A, 1 January 2013, V(559), PP 436-446. http://dx.doi.org/10.1016/j.msea.2012.08.123
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel Loading Phenomena" International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 473-485. http://dx.doi.org/10.1007/s00170-013-4745-z
Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, "Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system" International Journal of Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp 505-512. http://www.springerlink.com/content/a3357l71563g2683/
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Prediction of TiN Coating Adhesion Strength on Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System," International Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue 8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
N. Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End Mill" International Journal of Precision Engineering and Manufacturing, December 2012, V(13), No. 12, pp. 2097-2102. http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
A.A. Hamdan, Ahmed A.D. Sarhan, M. Hamdi, "An Optimization Method of the Machining Parameters in High Speed Machining of Stainless Steel Using Coated Carbide Tool for Best Surface Finish", The International Journal of Advanced Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91. http://www.springerlink.com/content/0208j341m335t3t0/
M. Sayuti1, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach" International Journal of Advanced Manufacturing Technology, June 2012, V(60), Issue 9-12, pp 939-950. http://www.springerlink.com/content/37t53v1435471362/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge Chipping in Glass Milling Operation using an Internal CBN Grinding Tool, International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 8, PP: 969-976. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533
Ahmed A. D. Sarhan, Atsushi Matsubara, "Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces," International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
Ahmed A.D. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation and Tool Wear in End-Milling", Journal of Materials Processing Technology, ( 2001), V(109), No.3, pp 229-235. http://www.sciencedirect.com/science/article/pii/S0924013600008037
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System", International Journal of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp 467-473. http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias "Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays," Journal of the Mechanical Behavior of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, "Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics", Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388. http://dx.doi.org/10.1016/j.jmapro.2013.02.004
Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara，Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors", JSME International Journal, Series C, (2006), Vol.49, No.2, pp.307-315.https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article
M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness" Journal of Advanced Materials Research (2010), V(154-155), pp 721-726. http://www.scientific.net/AMR.154-155.721
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach", International Journal of Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp 1153-1164. http://dx.doi.org/10.1007/s00170-013-5093-8
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, "Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature" International Journal of Precision Engineering and Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.http://link.springer.com/article/10.1007%2Fs12541-013-0197-5
M. Sayuti, Ahmed A. D. Sarhan, S. Salem, "Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140" Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi Abd Shukor, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research, 2013, V(748), pp 264-268.http://www.scientific.net/AMR.748.264
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D. Sarhan, "Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application", Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2, pp 785-797. http://dx.doi.org/10.1007/s11661-013-2043-x
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, "A New Method for Determination of Grinding Wheel Loading Using Digital Image Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013) Paper No: MANU-12-1175; Doi: 10.1115/1.4025782 http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
Mahdi Sparham, Ahmed A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an Automated Lubrication Control System in CNC Machine Tool Guideways for More Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol (2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 1143-1155. http://dx.doi.org/10.1007/s00170-013-5334-x
Ahmed A. D. Sarhan, "Investigate the spindle errors motions from thermal change for high precision CNC machining capability", International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 957-963. http://dx.doi.org/10.1007/s00170-013-5339-5
S. Y. Sia, Ahmed A. D. Sarhan, "Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system", Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071. http://dx.doi.org/10.1007/s00170-013-5340-z
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum disulfide (MoS2) Nanolubrication in End Milling Machining" Journal of Cleaner Production, 66 (2014) 685-691. http://www.sciencedirect.com/science/article/pii/S0959652613007403
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi, "A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending Principle Approach" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan, "Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas" International Journal of Advanced Manufacturing Technology, Volume 70, Issue 9 (2014), Page 2233-2240. http://dx.doi.org/10.1007/s00170-013-5471-2
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Farshid Hasani "Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 632–643. http://www.sciencedirect.com/science/article/pii/S0959652613007828
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M. Hamdi "Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299
N. Zalnezhad, Ahmed A. D. Sarhan, "A Fuzzy Logic Predictive Model for Measured Surface Roughness of Ti-TiN Coating on AL7075-T6 Alloy for Longer Fretting Fatigue Life" Measurement, Volume 49, March 2014, Pages 256–265. http://www.sciencedirect.com/science/article/pii/S0263224113005952
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad Zareinejad, Ahmed A. D. Sarhan, "Disturbance Rejection Based Robust Control for Micro Positioning of Piezoelectric Actuators" Comptes Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, "Investigate the Surface Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach", International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1143-1150. http://dx.doi.org/10.1007/s00170-013-5543-3
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan, "Development of SiO2 Nanolubrication System to be Used In Sliding Bearings" International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1277-1284. http://dx.doi.org/10.1007/s00170-013-5566-9
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, "Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption" Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M. Zareinejad, "Continuous dynamic modeling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behavior analysis" Mathematical and Computer Modeling of Dynamical Systems, Volume 21, Issue 2, 2015, pp. 130-152 http://dx.doi.org/10.1080/13873954.2014.906472
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder and More Wear Resistance of Substrate Surface" International Journal of Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12, pp 1491-1502. http://link.springer.com/article/10.1007/s00170-014-5757-z
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A. R. Bushroa, "A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon- Review Paper", Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N. A. Mardi, "Modified Robust External Force Control with Disturbance Rejection with Application to Piezoelectric Actuators" Transactions of the Institute of Measurement and Control, January 2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY,, "Investigate the effect of the machining parameters on the surface quality of machined Brass (60/40) in CNC End-Milling-Automotive application", International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, pp 531-537. http://dx.doi.org/10.1007/s00170-014-6016-z
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun "Plasma thermal spray of ceramic oxide coating layer to enhance wear and corrosion resistance of carbon steel for oil and gas application" Ceramics international, Volume 40, Issue 9, Part A, November 2014, Pages 14267–14277. http://www.sciencedirect.com/science/article/pii/S027288421400889X#
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation System without Force Sensor", J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587. http://link.springer.com/article/10.1007/s40430-014-0207-2
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D. Sarhan, "Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings", Ceramics international, Volume 40, Issue 10, Part A, December 2014, Pages 15603–15615. http://www.sciencedirect.com/science/article/pii/S0272884214011018
Saeid Baradaran, Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D. Sarhan, Y. Alias, "Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V", Surface and Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990. http://www.sciencedirect.com/science/article/pii/S0257897214006458
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi, "Review on improvement of wire electrodes properties for higher working time and utilization in Wire EDM machining" International Journal of Advanced Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351. http://dx.doi.org/10.1007/s00170-014-6243-3
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill," Advances in Materials Science and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267. http://www.hindawi.com/journals/amse/aip/485267/
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa, "Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy Rule Based Approach" Tribology Transactions Volume 58, Issue 2, pp. 240-246, 2015. http://dx.doi.org/10.1080/10402004.2014.962205
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, "Cutting force based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining", International Journal of Advanced Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467. http://dx.doi.org/10.1007/s00170-014-6379-1
H.Amini, S.M. Rezaei, Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi "Transparency Improvement by External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation System", ASME, Journal of Dynamic Systems, Measurement and Control, 137(5), 051013 (May 01, 2015) (15 pages). http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing Cutting Parameters in Inclined End Milling for Minimum Surface Residual Stress - Taguchi Approach" Measurement, Volume 60, January 2015, Pages 267–275. http://www.sciencedirect.com/science/article/pii/S0263224114004667
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D. Sarhan, S. Ramesh, H. M. Khanlou, "Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning" Measurement, Volume 61, February 2015, Pages 150–161. http://www.sciencedirect.com/science/article/pii/S0263224114004679
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan, Noording Mohd Yusof, "Investigating the Electrical Discharge Machining (EDM) Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material Removal Rate (MRR) and Less TWR - RSM Approach", Int. J Adv Manuf. Technol. (2015) 77: 831–838. http://dx.doi.org/10.1007/s00170-014-6491-2
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed Farahany, Ramesh Singh, Ibrahim Maher, "Machinability of Al-Si-Cu cast alloy containing bismuth and antimony when dry turning using coated carbide insert" Measurement, Volume 62, February 2015, Pages 170–178. http://dx.doi.org/10.1016/j.measurement.2014.10.030
Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md NizamAbd Wahab, "Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy" Measurement, Volume 61, February 2015, Pages 39–50. http://www.sciencedirect.com/science/article/pii/S0263224114004941#
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of Aerospace AL tempered grade 6061" Journal of Cleaner Production, Volume 89, 15 February 2015, Pages 286–295. http://www.sciencedirect.com/science/article/pii/S0959652614011767
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, "Nonlinear dynamic analysis of a new anti-backlash gear mechanism design for reducing dynamic transmission error," ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648
Ahmed A. D. Sarhan, A. Matsubara "Investigate the Characterization of Machine Tool Spindle Stiffness for Intelligent CNC Machining", Robotics and Computer-Integrated Manufacturing, 34(2015)133–139. http://dx.doi.org/10.1016/j.rcim.2014.12.001
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, "The Tribological and Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel" Ceramic international, 41 (2015) 5387–5396. hhttp://dx.doi.org/10.1016/j.ceramint.2014.12.102
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D. Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand, M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger", Hindawi Publishing Corporation, The Scientific World Journal, The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657 http://www.hindawi.com/journals/tswj/aip/291657/
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan, "Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer using CO2 Laser" ASME, J. Manuf. Sci. Eng. 137(3), 031010 (Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of nickel-based high-strength Inconel 738LC Superalloy with deeper and higher holes quality", Int J Adv Manuf Technol (2016) 82:877–888 http://dx.doi.org/10.1007/s00170-015-7414-6
Ibrahem Maher, Ahmed A.D. Sarhan, M. Hamdi, "Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production" Journal of Cleaner Production 108 (2015) 247-255. http://www.sciencedirect.com/science/article/pii/S0959652615007763
Seyed Reza besharati, Vahid Dabbagh, Ahmed A. D. Sarhan, Jvad akbari, Mohd Hamdi, Zhi Chao Ong, "Multi-objective design and structural optimization of the gantry in a gantry machine tool aimed at improving static, dynamic, light-weight and low-cost performance," Concurrent Engineering: Research and Applications, 2016, Vol. 24(1) 83–93 http://cer.sagepub.com/content/24/1/83
B. Rahmati, Ahmed A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS, "Enhancement of adhesion strength of Tantalum Oxide ceramic thin film coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics International, 41 (2015) 13055 – 13063. http://dx.doi.org/10.1016/j.ceramint.2015.07.090
S. Baradaran, Bahman Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International, 41 (2015) 14157–14164. http://dx.doi.org/10.1016/j.ceramint.2015.07.038
M.A. Ezazi, Farazila Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber Laser technology to weld dissimilar materials: Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux", Materials and Design, 87 (2015) 105–123. http://www.sciencedirect.com/science/article/pii/S0264127515302641
B. Rahmati, Ahmed A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B. W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy for better mechanical properties and biocompatibility enhancement" Ceramics International, 42 (2016) 466–480 http://www.sciencedirect.com/science/article/pii/S0272884215016594
S. Paria, S. Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application", J Therm Anal Calorim (2016) 123:1371–1381 http://link.springer.com/article/10.1007/s10973-015-5006-1
N. Masmiati, Ahmed A. D. Sarhan, M. A. Hassan, M. Hamdi, "Novel Uses of SiO2 Nanolubrication in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High Energy X-ray Diffraction Data" Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230 no. 6, pp.697-708. http://pij.sagepub.com/content/230/6/697
G. Manadis, S. M. Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams", Journal of Intelligent Material Systems and Structures, August 2016 vol. 27 no. 13 1802-1813. http://jim.sagepub.com/content/27/13/1802
Houriyeh Marashi, Ahmed A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2 steel" Applied Surface Science, 357 (2015) 892–907 http://www.sciencedirect.com/science/article/pii/S0169433215021996
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun, "Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for Oil and Gas", Ceramics International, 42 (2016) 3397–3406. http://www.sciencedirect.com/science/article/pii/S0272884215020404
M.A Zavareh, Ahmed A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection evaluation of two new advanced ceramic composites thermal spray coatings Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics International 42 (2016) 5203–5210 http://dx.doi.org/10.1016/j.ceramint.2015.12.044
80- E. Zalnezhad, E. Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability, structural and optical properties investigation of TiO2 nanotubular arrays" Materials Research Bulletin, Volume 78, June 2016, Pages 179–185 http://www.sciencedirect.com/science/article/pii/S0025540816300356
Mahdi Sparham, Ahmed A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting force analysis to estimate the friction force in linear guideways of CNC machine", Measurement 85 (2016) 65–79. http://www.sciencedirect.com/science/article/pii/S0263224116000944
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, "Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel", Measurement 86 (2016) 253–265. http://www.sciencedirect.com/science/article/pii/S0263224116001263
B. Rahmati, Ahmed A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy", Journal of Alloys and Compounds 676 (2016) 369-376. http://www.sciencedirect.com/science/article/pii/S0925838816307721
Ibrahem Maher, Ahmed A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi, "White layer thickness prediction in WEDM using neuro-fuzzy modeling" Transactions of the IMF, 2016, 94:4, 204-210 http://dx.doi.org/10.1080/00202967.2016.1180847
A. Hozoorbakhsh, M. I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran, "An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid Dynamics (CFD)," International Communications in Heat and Mass Transfer 75 (2016) 328–340. ttp://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Houriyeh Marashi, Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the art in powder mixed dielectric for EDM applications", Precision Engineering, Volume 46, October 2016, Pages 11–33. http://www.sciencedirect.com/science/article/pii/S0141635916300691
Houriyeh Marashi, D. M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe plastic deformation to process electrical discharge machining electrodes", Precision engineering, Volume 46, October 2016, Pages 309–322 http://www.sciencedirect.com/science/article/pii/S014163591630071X
H. Amini, Behfar Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, "Sensor-less Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric actuators", ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982
brahem Maher, Ahmed A.D. Sarhan, "Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI 10.1007/s00170-016-9680-3 http://dx.doi.org/10.1007/s00170-016-9680-3
Mehdi Hourmand, Ahmed A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine", Measurement 97 (2017) 64–78. http://www.sciencedirect.com/science/article/pii/S026322411630656X
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti, "Micro-electrode fabrication processes for micro-EDM drilling and milling: A state of the art review", Int J Adv Manuf Technol, 2016, DOI: 10.1007/s00170-016-9671-4.http://dx.doi.org/10.1007/s00170-016-9671-4
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi "Design and experimental evaluation of precise compact tubular ultrasonic motor driven with single phase source", Precision Engineering 48 (2017) 172–180. http://www.sciencedirect.com/science/article/pii/S0141635916303944
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D. Sarhan, H. Amini, "Improving Teleoperation System Performance in the Presence of Estimated External Force", Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93. http://www.sciencedirect.com/science/article/pii/S0736584516301879
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A. Hassan, Ahmed A.D. Sarhan, "Numerical Simulation of Metal Removal in Laser Drilling using Symmetric Smoothed Particle Hydrodynamics" Precision Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.http://www.sciencedirect.com/science/article/pii/S014163591730034X
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A Hassan, Ahmed A.D. Sarhan "Numerical Simulation of Metal Removal in Laser Drilling Using Radial Point Interpolation Method", Engineering Analysis with Boundary Elements, 77 (2017) 89–96. http://www.sciencedirect.com/science/article/pii/S0955799717300401
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti, M. Hamdi "Ultrasonic Assisted Grinding of Advanced Materials for Biomedical and Aerospace Applications-A Review" Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z http://dx.doi.org/10.1007/s00170-017-0316-z
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés "Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals", Ceramics International 43 (2017) 7594–7599 http://doi.org/10.1016/j.ceramint.2017.03.052
M. Z. Ibrahim, Ahmed A.D. Sarhan, F. Yusuf, M. Hamdi, "Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article", Journal of Alloys and Compounds 714 (2017) 636-667. http://dx.doi.org/10.1016/j.jallcom.2017.04.231
M. Sparham, Ahmed A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, "ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system", Journal of Manufacturing Processes 28 (2017) 168–185. http://dx.doi.org/10.1016/j.jmapro.2017.05.020
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Design and manufacturing of Ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area", Measurement 109 (2017) 425–431. http://dx.doi.org/10.1016/j.measurement.2017.06.007
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D. Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta, "Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes", Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0332-z. https://link.springer.com/article/10.1007/s00170-017-0332-z
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N. Nazria, M.A. Omar Awangc, M. A. Hassane, "Numerical Simulation of Metal Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation Method" Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032. https://doi.org/10.1016/j.apm.2017.08.032
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Electromechanical modeling and high speed design of a tubular ultrasonic motor", The international journal of acoustics and vibration, Accepted

ME, KFUPM Bldg 63-Room 303 +966- 13 -860- 2547 +966-13-860 -2949 (ME Dept) ahsarhan@kfupm.edu.sa http://ahmedsarhan.com/

Graduate Assistants

Education

Ph.D., Precision Engineering, Kyoto University, Kyoto, Japan

M.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

B.Sc., Mechanical Engineering, Assiut University, Assiut, Egypt

Courses Taught

Advanced Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
Machine Tool Engineering, 2007-Present
Basic manufacturing processes, 2009-Present
Introduction to Manufacturing Process, 2009-Present
Tool Engineering, 2009-Present
Surface Engineering, 2009-Present
Advanced Manufacturing Processes, 2009-Present
CNC Technology and Programming 2007-2009

Research Areas

Precision Machining and Computer Integrated Manufacturing (CIM)
Cutting Tool Technology
Non-Conventional Machining
Additive manufacturing, Surface Engineering and Coatings

Representative Publications

Patents

Rotating Bending Fretting Fatigue Machine (Patent Number: PI2011002242 - June 16-2011) http://umfacts.um.edu.my/patent/index.php
Intelligent Lubrication System in CNC Machine Linear guide ways for More Precise Machining and Less Oil Consumption (Patent Number: PI 2012701005 - 26/11/2012). (Granted Number: MY-155471-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://www.google.com/patents/WO2014081281A2?cl=en
Modified wheelchair with transferring mechanism to assist the wheelchair-bound person (Patent Number: PI 2012004799 – 16-11-2012) http://umfacts.um.edu.my/patent/index.php
Newly nanolubrication system in CNC machining processes for better product quality, more power savings, and less oil consumption and pollution (Patent Number: PI2012701070 -5/12/2012). http://www.highbeam.com/doc/1P3-3334655121.html http://www.sumobrain.com/patents/wipo/Nano-liquid-lubrication-composition-its/WO2014088409A2.pdf
Titanium Nitride Coated Aerospace Al7075-T6 Alloy Substrate and Methods Thereof (Patent Number: PI 2012005214 – 4/12/2012) - (Patent Number: PI 2016701774 – 17/5/2016) http://umfacts.um.edu.my/patent/index.php
A new technique for hard anodizing of Al7075-T6 alloy (Patent Number: PI2012005131 - 10/12/2012). (Granted Number: MY-155475-A - 16/10/2015) (28/11/2012 - 28/11/2032) http://umfacts.um.edu.my/patent/index.php
Gear backlash compensation mechanism (GBCM) in rack and pinion system (Patent Number: PI 2012701279 - 26/12/2012). http://umfacts.um.edu.my/patent/index.php
An Improved Computer Numerically Controlled Gantry Device and Method Thereof (Patent Number: PI 2013001205 – 5/4/2013). http://patentscope.wipo.int/search/en/WO2014163483
A Wheelchair For Negotiating Gab Obstacles (Patent Number: PI 2013701166 – 29/6/2013) http://umfacts.um.edu.my/patent/index.php
A Wheelchair carrier Attachable Baby Seat To Manual Wheelchair (Patent Number: PI 2013003610 - 4/10/2013). http://umfacts.um.edu.my/patent/index.php
Molybdenum Disulfide (MoS2) Nanolubrication system in CNC machining applications (PI 2013004641 – 24/12/2013). http://umfacts.um.edu.my/patent/index.php
Horizontal heat exchanger for thermal energy storage technique (PI 2014700388 – 21/2/2014), Google Patents. (PCT/MY2015/050005 - Aug 27, 2015) http://www.google.com/patents/WO2015126238A1?cl=en
Ultrasonic motor with new Housing and Preload Mechanism (PI 2014702645-17 September 2014). http://umfacts.um.edu.my/patent/index.php
A novel high-pressure fluid jet in grinding process for less wheel loaded areas (PI 2014703299 - 6 November 2014). http://umfacts.um.edu.my/patent/index.php
Thermal spray of Ceramic oxide thin layer coating to enhance wear and corrosion resistance of carbon steel for oil and gas application(PI 2014701851-11 July 2014) http://umfacts.um.edu.my/patent/index.php
Compact and thin ultrasonic motor with ability of producing high torque (PI 2014703157 - 24/10/2014). http://umfacts.um.edu.my/patent/index.php
Ultrasonic screw pump (USP) for liquid and powder movement (PI 2014703150-23/10/2014). http://umfacts.um.edu.my/patent/index.php
Multiple Nozzle FDM 3D printer (PRINT-HEAD ASSEMBLY) for increasing surface quality and product fabrication speed (PI 2015700874-19/03/2015)
Food Decorating System Patent: (PI 2015700957-March 2015)
Method and Apparatus for Fabricating High Aspect Ratio Micro-Electrode (PI 2016700365 - 1 February 2016)
An Electrode Wire for Use in Wire Electrical Discharge Machining (PI 2016700115 - 13 January 2016)
An Electric Discharge Machining Dielectric Fluid and An Electric Discharge Machining Apparatus (PI 2016700225 - 21 January 2016)
Electrical Discharge Machining Electrode with Lower Wear Rate (Under process)

Representative Publications (Book Chapter)

Ahmed A. D. Sarhan, Atsushi Matsubara (2013) "High-Precision Machining by Measuring and Compensating the Error Motion of Spindle's Axis of Rotation in Radial Direction", "Electrical Engineering and Intelligent Systems (EEIS)": Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2013, Volume 130, 347-359, (ISI-Cited Publication), http://www.springerlink.com/content/p174772810863467/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, 2013 "Surface Quality Improvement in CNC End Milling Machined Aerospace AL-2017-T4 Alloy using Carbon Onion Nanolubrication with DLC Cutting Tool" IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, Volume 229, 2013, pp 669-683, (ISI-Cited Publication), http://link.springer.com/chapter/10.1007/978-94-007-6190-2_51
Erfan Zalnezhad, Ahmed A.D. Sarhan, (2014) "Fuzzy Logic Modeling for Higher Adhesion Strength of Cr/Cr-N Multilayer thin film Coating on aerospace Al7075-T6 Alloy for higher Fretting Fatigue Life," Transactions on Engineering Technologies - Springer international publisher Pte Ltd., Lecture Notes in Electrical Engineering, 2014, pp 291-304, DOI : 10.1007/978-94-017-9115-1_22, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-9115-1_22
M. Sayuti1, Ahmed A. D. Sarhan, (2015) "ANFIS Modeling for Higher Machining Performance of Aerospace Aluminum Tempered Grade 6061 Using Novel SiO2 Nanolubrication", IAENG Transactions on Engineering Technologies, Springer international publisher Pte Ltd., Chapter 39, 2015, pp 551-565, DOI: 10.1007/978-94-017-7236-5_39, ISBN : 978-94-017-7235-8, (ISI-Cited Publication). http://link.springer.com/chapter/10.1007/978-94-017-7236-5_39
E Zalnezhad, Ahmed AD Sarhan, 2015/2/10, "Fuzzy modeling to predict the adhesion strength of TiN ceramic thin film coating on aerospace AL7075-T6 alloy", Recent Advances in Structural Integrity Analysis-Proceedings of the International Congress (APCF/SIF-2014):(APCFS/SIF 2014), Woodhead Publishing-Elsevier, ISBN: 978-0-08-100203-2, Pages 239
Ibrahem Maher, Ahmed A.D. Sarhana, H. Marashi, "Effect of Electrical Discharge Energy on White Layer Thickness of WEDM Process", Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 231–266, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091542 http://www.sciencedirect.com/science/referenceworks/9780128032497
Houriyeh Marashi, Ahmed A. D. Sarhan, I. Maher, M. Sayuti, "Various Techniques to Improve EDM Capabilities: A Review," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 171–202, Volume 1 http://www.sciencedirect.com/science/article/pii/B9780128035818091530 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mehdi Hourmand, Ahmed A. D. Sarhan, Saeed Farahany, M. Sayuti, " Introducing the Modified Fabrication and Measurement Process of Micro-electrode for Micro-EDM of Tungsten Carbide to Improve MRR, EWR and Hole Quality using EDM machine," Elsevier publisher, Reference Module in Materials Science and Materials Engineering, Comprehensive Materials Finishing, 2017, Pages 267–321, Volume http://www.sciencedirect.com/science/article/pii/B9780128035818091554 http://www.sciencedirect.com/science/referenceworks/9780128032497
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, (2016) "Introducing New Coating Material Alloy with Potential Elements for High Corrosion Resistance for Oil and Gas Application", Advances in Tribology book, edited by Prof. P. H. Darji (Ed.), InTech, ISBN 978-953-51-2743-7, Print ISBN 978-953-51-2742-0, Published: October 26, 2016 under CC BY 3.0 license. http://www.intechopen.com/books/advances-in-tribology

Representative Publications (ISI Journals)

E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the PVD TiN Thin Film Coating's parameters on Aerospace AL7075-T6 Alloy for Higher Coating Hardness and Adhesion with Better Tribological Properties of the Coating Surface", International Journal of Advanced Manufacturing Technology, January 2013, V(64), Issue 1-4, pp 281-290. http://www.springerlink.com/content/uj225425221833p4/
M. Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "An investigation of optimum SiO2 nanolubrication parameters in end milling of aerospace Al6061-T6 alloy", International Journal of Advanced Manufacturing Technology, July 2013, V(67), Issue 1-4, pp 833-849. http://dx.doi.org/10.1007/s00170-012-4527-z
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "A Fuzzy Logic based Model to Predict surface hardness of thin film TiN Coating on Aerospace AL70751", International Journal of Advanced Manufacturing Technology, September 2013, V (68), Issue 1-4, pp 415-423. http://dx.doi.org/10.1007/s00170-013-4738-y
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigate the Effects of Hard Anodizing Parameters on Surface Hardness of Hard Anodized Aerospace AL7075-T6 Alloy Using Fuzzy logic approach for Fretting Fatigue Application", International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 453-464. http://dx.doi.org/10.1007/s00170-013-4743-1
M. Sayuti, Ahmed A. D. Sarhan, Tomohisa Tanaka, M. Hamdi, Yoshio Saito, "Cutting force reduction and surface quality improvement in machining of aerospace duralumin AL-2017-T4 using carbon onion nanolubrication system," The International Journal of Advanced Manufacturing Technology, April 2013, V(65), Issue 9-12, pp 1493-1500, (2012). http://www.springerlink.com/content/a36735143468w772/
Ahmed A. D. Sarhan, E. Zalnezhad, M. Hamdi, "The influence of Higher Surface Hardness on Fretting Fatigue Life of Hard Anodized aerospace AL7075-T6 Alloy," International Journal of Materials Science & Engineering A, 10 January 2013, V(560), PP 377-387. http://dx.doi.org/10.1016/j.msea.2012.09.082
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Investigating the fretting fatigue life of thin film titanium nitride coated aerospace Al7075-T6 alloy," Materials Science & Engineering A, 1 January 2013, V(559), PP 436-446. http://dx.doi.org/10.1016/j.msea.2012.08.123
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan "Analytical Modeling of Grinding Wheel Loading Phenomena" International Journal of Advanced Manufacturing Technology, September 2013, V(68), Issue 1-4, pp 473-485. http://dx.doi.org/10.1007/s00170-013-4745-z
Ahmed A. D. Sarhan, M.Sayuti, M. Hamdi, "Reduction of power and lubricant oil consumption in milling process using a new SiO2 nanolubrication system" International Journal of Advanced Manufacturing Technology, November 2012, V(63), Issue 5-8, pp 505-512. http://www.springerlink.com/content/a3357l71563g2683/
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Prediction of TiN Coating Adhesion Strength on Aerospace AL7075-T6 Alloy Using Fuzzy Rule Based System," International Journal of Precision Engineering and Manufacturing, August 2012, V(13), Issue 8, pp 1453-1459. http://link.springer.com/article/10.1007%2Fs12541-012-0191-3
N. Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Optimizing the Cutting Parameters for Better Surface Quality in 2.5D Cutting Utilizing Titanium Coated Carbide Ball End Mill" International Journal of Precision Engineering and Manufacturing, December 2012, V(13), No. 12, pp. 2097-2102. http://link.springer.com/article/10.1007%2Fs12541-012-0277-y
A.A. Hamdan, Ahmed A.D. Sarhan, M. Hamdi, "An Optimization Method of the Machining Parameters in High Speed Machining of Stainless Steel Using Coated Carbide Tool for Best Surface Finish", The International Journal of Advanced Manufacturing Technology, January 2012, V(58), Issue 1-4, pp 81-91. http://www.springerlink.com/content/0208j341m335t3t0/
M. Sayuti1, Ahmed A. D. Sarhan, M. Fadzil, M. Hamdi, "Enhancement and verification of a machined surface quality for glass milling operation-using CBN grinding tool- Taguchi approach" International Journal of Advanced Manufacturing Technology, June 2012, V(60), Issue 9-12, pp 939-950. http://www.springerlink.com/content/37t53v1435471362/
M. Sayuti1, Ahmed A. D. Sarhan, M. Hamdi, "Experimental Study on Minimizing Edge Chipping in Glass Milling Operation using an Internal CBN Grinding Tool, International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 8, PP: 969-976. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.530533
Ahmed A. D. Sarhan, Atsushi Matsubara, "Compensation Method of the Machine Tool Spindle Thermal Displacement for Accurate Monitoring of Cutting Forces," International Journal of Materials and Manufacturing Processes, 2011, V(26), Issue 12, pp: 1511-1521. http://www.tandfonline.com/doi/abs/10.1080/10426914.2010.544825
Ahmed A.D. Sarhan, R. Sayed, A. A. Nasr, and R. M. El-Zahry, "Interrelation Between Cutting Force Variation and Tool Wear in End-Milling", Journal of Materials Processing Technology, ( 2001), V(109), No.3, pp 229-235. http://www.sciencedirect.com/science/article/pii/S0924013600008037
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Surface Hardness Prediction of CrN Thin Film Coating on AL7075-T6 Alloy Using Fuzzy Logic System", International Journal of Precision Engineering and Manufacturing, March 2013, V(14), Issue 3, pp 467-473. http://www.springerlink.com/openurl.asp?genre=article&id=doi:10.1007/s12541-013-0063-5
S. Baradarana, W. J. Basirunb, E. Zalnezhad, M. Hamdi, Ahmed A.D. Sarhan, Y. Alias "Fabrication and deformation behaviour of multilayer Al2O3/Ti/TiO2 nanotube arrays," Journal of the Mechanical Behavior of Biomedical Materials, April 2013, V(20), Pages 272–282. http://dx.doi.org/10.1016/j.jmbbm.2013.01.020
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, "Investigating the Effects of Liquid Atomization and Delivery Parameters of Minimum Quantity Lubrication on the Grinding Process of Al2O3 Engineering Ceramics", Journal of Manufacturing Processes, (2013), V(15), Issue 3, pp: 374–388. http://dx.doi.org/10.1016/j.jmapro.2013.02.004
Ahmed A. D. Sarhan, Atsushi Matsubara, Motoyuki Sugihara，Hidenori Saraie, Soichi Ibaraki, Yoshiaki Kakino, "Monitoring Method of Cutting Force by Using Additional Spindle Sensors", JSME International Journal, Series C, (2006), Vol.49, No.2, pp.307-315.https://www.jstage.jst.go.jp/article/jsmec/49/2/49_2_307/_article
M.Sayuti, Ahmed A. D. Sarhan, M. Hamdi, "Optimizing the Machining Parameters in Glass Grinding Operation on the CNC Milling Machine for Best Surface Roughness" Journal of Advanced Materials Research (2010), V(154-155), pp 721-726. http://www.scientific.net/AMR.154-155.721
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Fretting Fatigue Life Evaluation of Multilayer Cr-CrN Coated Al7075-T6 with Higher Adhesion Strength-Fuzzy Logic Approach", International Journal of Advanced Manufacturing Technology, November 2013, Volume 69, Issue 5-8, pp 1153-1164. http://dx.doi.org/10.1007/s00170-013-5093-8
Mansour S.Farhan, Erfan. Zalnezhad, Abdul. Razak. Bushroa, Ahmed Aly Diaa Sarhan, "Electrical and Optical Properties of Indium-tin Oxide (ITO) Films Prepared by Ion-Assisted Deposition (IAD) at Room Temperature" International Journal of Precision Engineering and Manufacturing, August 2013,V(14), No. 8, pp. 1465-1469.http://link.springer.com/article/10.1007%2Fs12541-013-0197-5
M. Sayuti, Ahmed A. D. Sarhan, S. Salem, "Development of SiO2 Nanolubrication System for better surface Quality, More Power Savings and Less Oil Consumption in Hard Turning of Hardened Steel AISI4140" Advanced Materials Research, 2013, V(748), pp 56-60. http://www.scientific.net/AMR.748.56
Nik Masmiati Nik Pa, Ahmed A.D. Sarhan, Mohd Hamdi Abd Shukor, "Investigate the Lubrication Effects on Cutting Force and Power Consumption in Up and Down End Milling", Advanced Materials Research, 2013, V(748), pp 264-268.http://www.scientific.net/AMR.748.264
E. Zalnezhad, S. Baradaran, A. R. Bushroa, Ahmed A. D. Sarhan, "Mechanical Property Enhancement of Ti-6Al-4V by Multilayer Thin Solid Film Ti/TiO2 Nanotubular Array Coating for Biomedical Application", Metallurgical and Materials Transactions A, February 2014, Volume 45, Issue 2, pp 785-797. http://dx.doi.org/10.1007/s11661-013-2043-x
H. Adibi, S.M. Rezaei, Ahmed A. D. Sarhan, "A New Method for Determination of Grinding Wheel Loading Using Digital Image Processing," ASME, J. Manuf. Sci. Eng. 136(1), 011012 (Dec 02, 2013) Paper No: MANU-12-1175; Doi: 10.1115/1.4025782 http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=1761413
Mahdi Sparham, Ahmed A. D. Sarhan, N. A. Mardi, M. Hamdi, "Design and Manufacturing of an Automated Lubrication Control System in CNC Machine Tool Guideways for More Precise Machining and Less Oil Consumption", Int J Adv Manuf Technol (2014) 70:1081–1090. http://dx.doi.org/10.1007/s00170-013-5325-y
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Investigating the optimum molybdenum disulfide (MoS2) nanolubrication parameters in CNC milling of AL6061-T6 alloy" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 1143-1155. http://dx.doi.org/10.1007/s00170-013-5334-x
Ahmed A. D. Sarhan, "Investigate the spindle errors motions from thermal change for high precision CNC machining capability", International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 5-8, pp 957-963. http://dx.doi.org/10.1007/s00170-013-5339-5
S. Y. Sia, Ahmed A. D. Sarhan, "Morphology investigation of worn bearing surfaces using SiO2 nanolubrication system", Int J Adv Manuf. Technol. (2014) 70: pp: 1063–1071. http://dx.doi.org/10.1007/s00170-013-5340-z
Bizhan Rahmati, Ahmed A. D. Sarhan, M.Sayuti, "Morphology of Surface Generated by End Milling AL6061-T6 using Molybdenum disulfide (MoS2) Nanolubrication in End Milling Machining" Journal of Cleaner Production, 66 (2014) 685-691. http://www.sciencedirect.com/science/article/pii/S0959652613007403
E. Zalnezhad, Ahmed A. D. Sarhan, P. Jahanshahi, "A New Fretting Fatigue Testing Machine Design, Utilizing Rotating-Bending Principle Approach" International Journal of Advanced Manufacturing Technology, February 2014, Volume 70, Issue 9-12, pp 2211-2219. http://dx.doi.org/10.1007/s00170-013-5457-0
H. Adibi, S. M. Rezaei, Ahmed A. D. Sarhan, "Investigation on using high-pressure fluid jet in grinding process for less wheel loaded areas" International Journal of Advanced Manufacturing Technology, Volume 70, Issue 9 (2014), Page 2233-2240. http://dx.doi.org/10.1007/s00170-013-5471-2
M. Emami, M. H. Sadeghi, Ahmed A. D. Sarhan, Farshid Hasani "Investigating the Minimum Quantity Lubrication in Grinding of Al2O3 Engineering Ceramic", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 632–643. http://www.sciencedirect.com/science/article/pii/S0959652613007828
M. Sayuti, M. E. Ooi , Ahmed A. D. Sarhan, M. Hamdi "Investigation on the Morphology of the Machined Surface in End Milling of Aerospace AL6061-T6 for Novel uses of SiO2 Nanolubrication System", Journal of Cleaner Production, Volume 66, 1 March 2014, Pages 655–663. http://www.sciencedirect.com/science/article/pii/S0959652613008299
N. Zalnezhad, Ahmed A. D. Sarhan, "A Fuzzy Logic Predictive Model for Measured Surface Roughness of Ti-TiN Coating on AL7075-T6 Alloy for Longer Fretting Fatigue Life" Measurement, Volume 49, March 2014, Pages 256–265. http://www.sciencedirect.com/science/article/pii/S0263224113005952
H. Ghafarirad, Seyed Mehdi Rezaei, Mohammad Zareinejad, Ahmed A. D. Sarhan, "Disturbance Rejection Based Robust Control for Micro Positioning of Piezoelectric Actuators" Comptes Rendus Mecanique, Volume 342, Issue 1, January 2014, Pages 32–45. http://dx.doi.org/10.1016/j.crme.2013.11.003
Ahmed A. D. Sarhan, N.S.M EL-TAYEB, "Investigate the Surface Quality of the Burnished Brass C3605-Fuzzy Rule Based Approach", International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1143-1150. http://dx.doi.org/10.1007/s00170-013-5543-3
S. Y. Sia, Eman Z. Bassyony, Ahmed A. D. Sarhan, "Development of SiO2 Nanolubrication System to be Used In Sliding Bearings" International Journal of Advanced Manufacturing Technology, Volume 71, Issue 5 (2014), Page 1277-1284. http://dx.doi.org/10.1007/s00170-013-5566-9
M. Sayuti, Ahmed A. D. Sarhan, F. Salem, "Novel Uses of SiO2 Nano-lubrication System in Hard Turning Process of Hardened Steel AISI4140 for Less Tool Wear, Surface Roughness and Oil Consumption" Journal of Cleaner Production, Volume 67, 15 March 2014, Pages 265–276. http://www.sciencedirect.com/science/article/pii/S0959652613009062
H. Ghafarirad, S.M. Rezaei, Ahmed A. D. Sarhan, M. Zareinejad, "Continuous dynamic modeling of bimorph piezoelectric cantilevered actuators considering hysteresis effect and dynamic behavior analysis" Mathematical and Computer Modeling of Dynamical Systems, Volume 21, Issue 2, 2015, pp. 130-152 http://dx.doi.org/10.1080/13873954.2014.906472
E. Zalnezhad, Ahmed A. D. Sarhan, M. Hamdi, "Multi-Layer Thin Film CrN Coating on Aerospace AL7075-T6 Alloy for Harder and More Wear Resistance of Substrate Surface" International Journal of Advanced Manufacturing Technology (2014), June 2014, Volume 72, Issue 9-12, pp 1491-1502. http://link.springer.com/article/10.1007/s00170-014-5757-z
E. Mohseni, E. Zalnezhad, Ahmed A. D. Sarhan, A. R. Bushroa, "A Study on Surface Modification of Al7075-T6 Alloy against Fretting Fatigue Phenomenon- Review Paper", Advances in Materials Science and Engineering, Volume 2014 (2014), Article ID 474723, 17 pages. http://www.hindawi.com/journals/amse/aip/474723/
H. Ghafarirad, S.M. Rezaei, Ahmed A.D. Sarhan, N. A. Mardi, "Modified Robust External Force Control with Disturbance Rejection with Application to Piezoelectric Actuators" Transactions of the Institute of Measurement and Control, January 2015 vol. 37 no. 1, pp.131-143. http://tim.sagepub.com/content/37/1/131
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY,, "Investigate the effect of the machining parameters on the surface quality of machined Brass (60/40) in CNC End-Milling-Automotive application", International Journal of Advanced Manufacturing Technology, September 2014, Volume 74, Issue 1-4, pp 531-537. http://dx.doi.org/10.1007/s00170-014-6016-z
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun "Plasma thermal spray of ceramic oxide coating layer to enhance wear and corrosion resistance of carbon steel for oil and gas application" Ceramics international, Volume 40, Issue 9, Part A, November 2014, Pages 14267–14277. http://www.sciencedirect.com/science/article/pii/S027288421400889X#
H. Amini, S.M. Rezaei, M. Zareinejad, H. Ghafarirad, Ahmed A. D. Sarhan, "Robust Control Based Linear Bilateral Teleoperation System without Force Sensor", J Braz. Soc. Mech. Sci. Eng. (2015) 37:579–587. http://link.springer.com/article/10.1007/s40430-014-0207-2
M.A. Ezazi, M.M. Quazi, E. Zalnezhad, Ahmed A. D. Sarhan, "Enhancing the tribo-mechanical properties of aerospace AL7075-T6 by magnetron-sputtered Ti/TiN, Cr/CrN & TiCr/TiCrN thin film ceramic coatings", Ceramics international, Volume 40, Issue 10, Part A, December 2014, Pages 15603–15615. http://www.sciencedirect.com/science/article/pii/S0272884214011018
Saeid Baradaran, Erfan Zalnezhad, W. J. Basirun, Mehran Sookhakian, Ahmed A. D. Sarhan, Y. Alias, "Statistical optimization and fretting fatigue study of Zr/ZrO2 nanotubular arrays coating on Ti-6Al-4V", Surface and Coatings Technology, (2014), Volume 258, 15 November 2014, Pages 979–990. http://www.sciencedirect.com/science/article/pii/S0257897214006458
Ibrahem Maher, Ahmed A.D. Sarhana, M. Hamdi, "Review on improvement of wire electrodes properties for higher working time and utilization in Wire EDM machining" International Journal of Advanced Manufacturing Technology (2014), Volume 76, Issue 1 (2015), Page 329-351. http://dx.doi.org/10.1007/s00170-014-6243-3
Nik Masmiati, Ahmed A. D. Sarhan, M. Hamdi "Investigating the Possibility to Reduce the Residual Stress Level in 2.5D Cutting Using Titanium Coated Carbide Ball End Mill," Advances in Materials Science and Engineering, vol. 2014, Article ID 485267, 13 pages, 2014. Doi:10.1155/2014/485267. http://www.hindawi.com/journals/amse/aip/485267/
Salman Al-Saeedi, Ahmed A.D. Sarhan, A.R Bushroa, "Investigate of the Surface Tribology of Roller Burnished Polymer – Fuzzy Rule Based Approach" Tribology Transactions Volume 58, Issue 2, pp. 240-246, 2015. http://dx.doi.org/10.1080/10402004.2014.962205
Ibrahem Maher, M.E.H. Eltaib, Ahmed A.D. Sarhan, R.M.El-ZAHRY, "Cutting force based adaptive neuro-fuzzy approach for accurate surface roughness prediction in end milling operation for intelligent machining", International Journal of Advanced Manufacturing Technology, February 2015, Volume 76, Issue 5-8, pp 1459-1467. http://dx.doi.org/10.1007/s00170-014-6379-1
H.Amini, S.M. Rezaei, Ahmed A. D. Sarhan, J.Akbari, N. D. Mardi "Transparency Improvement by External Force Estimation in Time Delayed Nonlinear Bilateral Teleoperation System", ASME, Journal of Dynamic Systems, Measurement and Control, 137(5), 051013 (May 01, 2015) (15 pages). http://dynamicsystems.asmedigitalcollection.asme.org/article.aspx?articleid=1936140
N. Masmiati, Ahmed A. D. Sarhan, "Optimizing Cutting Parameters in Inclined End Milling for Minimum Surface Residual Stress - Taguchi Approach" Measurement, Volume 60, January 2015, Pages 267–275. http://www.sciencedirect.com/science/article/pii/S0263224114004667
M. M. Barzani, E. Zalnezhad, S. Farahany, Ahmed A.D. Sarhan, S. Ramesh, H. M. Khanlou, "Fuzzy Logic Based Model for Predicting Surface Roughness of Machined Al-Si-Cu Cast Alloy Using Different Additives-Turning" Measurement, Volume 61, February 2015, Pages 150–161. http://www.sciencedirect.com/science/article/pii/S0263224114004679
Mehdi Hourmand, Saeed Farahany, Ahmed A. D. Sarhan, Noording Mohd Yusof, "Investigating the Electrical Discharge Machining (EDM) Parameter Effects on Al-Mg2Si Metal Matrix Composite (MMC) for High Material Removal Rate (MRR) and Less TWR - RSM Approach", Int. J Adv Manuf. Technol. (2015) 77: 831–838. http://dx.doi.org/10.1007/s00170-014-6491-2
Mohsen Marani Barzani, Ahmed A.D. Sarhan, Saaed Farahany, Ramesh Singh, Ibrahim Maher, "Machinability of Al-Si-Cu cast alloy containing bismuth and antimony when dry turning using coated carbide insert" Measurement, Volume 62, February 2015, Pages 170–178. http://dx.doi.org/10.1016/j.measurement.2014.10.030
Zuriani Usop, Ahmed A. D. Sarhan, N. A. Mardi, Md NizamAbd Wahab, "Measuring of positioning, circularity and static errors of a CNC Vertical Machining Centre for validating the machining accuracy" Measurement, Volume 61, February 2015, Pages 39–50. http://www.sciencedirect.com/science/article/pii/S0263224114004941#
M. E. Ooi, M. Sayuti, Ahmed. A. D. Sarhan, " Fuzzy-logic-based approach to investigate the novel uses of nano suspended lubrication in precise machining of Aerospace AL tempered grade 6061" Journal of Cleaner Production, Volume 89, 15 February 2015, Pages 286–295. http://www.sciencedirect.com/science/article/pii/S0959652614011767
Seyed Reza Besharati, Vahid Dabbagh, Hamid Amini, Ahmed A.D. Sarhan, Javad Akbari, Mohd Hamdi Abd Shukor, "Nonlinear dynamic analysis of a new anti-backlash gear mechanism design for reducing dynamic transmission error," ASME, J. Mech. Des. 137(5), 054502 (May 01, 2015).http://mechanicaldesign.asmedigitalcollection.asme.org/article.aspx?articleid=2091648
Ahmed A. D. Sarhan, A. Matsubara "Investigate the Characterization of Machine Tool Spindle Stiffness for Intelligent CNC Machining", Robotics and Computer-Integrated Manufacturing, 34(2015)133–139. http://dx.doi.org/10.1016/j.rcim.2014.12.001
M. Akhtari Zavareh, Ahmed A. D. Sarhan, A.R Bushroa, Wan Jeffrey Basirun, "The Tribological and Electrochemical behavior of HVOF-sprayed Cr3C2–NiCr coating on carbon steel" Ceramic international, 41 (2015) 5387–5396. hhttp://dx.doi.org/10.1016/j.ceramint.2014.12.102
Saman Paria, Mohammad Shahab Goodarzi, Ahmed A. D. Sarhan, S. Baradaran, Kazi Salimnewaz, H.S.C. Metselaar, Hooman Yarmand, M.A. Alavi, and Behnam Rahmanian, "Indoor solar thermal energy saving time with phase change material in a horizontal shell and finned-tube heat exchanger", Hindawi Publishing Corporation, The Scientific World Journal, The Scientific World Journal, Volume 2015, Article ID 291657, 7 pages, http://dx.doi.org/10.1155/2015/291657 http://www.hindawi.com/journals/tswj/aip/291657/
Mum Wai Yip, Stuart Barnes, Ahmed A.D. Sarhan, "Deposition of a Silicon Carbide Reinforced Metal Matrix Composite (P25) Layer using CO2 Laser" ASME, J. Manuf. Sci. Eng. 137(3), 031010 (Jun 01, 2015) (8 pages), doi:10.1115/1.4029831. http://manufacturingscience.asmedigitalcollection.asme.org/article.aspx?articleid=2130671
V. Baghlani, P. Mehbudi, J. Akbari, E. Zalnezhad, Ahmed A. D. Sarhan, "An Optimization technique on Ultrasonic and Cutting Parameters for Drilling and Deep Drilling of nickel-based high-strength Inconel 738LC Superalloy with deeper and higher holes quality", Int J Adv Manuf Technol (2016) 82:877–888 http://dx.doi.org/10.1007/s00170-015-7414-6
Ibrahem Maher, Ahmed A.D. Sarhan, M. Hamdi, "Increasing the productivity of the wire-cut electrical discharge machine associated with sustainable production" Journal of Cleaner Production 108 (2015) 247-255. http://www.sciencedirect.com/science/article/pii/S0959652615007763
Seyed Reza besharati, Vahid Dabbagh, Ahmed A. D. Sarhan, Jvad akbari, Mohd Hamdi, Zhi Chao Ong, "Multi-objective design and structural optimization of the gantry in a gantry machine tool aimed at improving static, dynamic, light-weight and low-cost performance," Concurrent Engineering: Research and Applications, 2016, Vol. 24(1) 83–93 http://cer.sagepub.com/content/24/1/83
B. Rahmati, Ahmed A.D. Sarhan, E. Zalnezhad, Z. Kamiab, B. Nasiri, W. A. B. W. ABAS, "Enhancement of adhesion strength of Tantalum Oxide ceramic thin film coating onto biomedical Ti-6Al-4V alloy by thermal surface treatment", Ceramics International, 41 (2015) 13055 – 13063. http://dx.doi.org/10.1016/j.ceramint.2015.07.090
S. Baradaran, Bahman Nasiri-Tabrizi, T.S. Velayutham, Ahmed A.D. Sarhan, "Thermally induced crystallization of mechanically alloyed Na0.5Bi0.5TiO3 and K0.5Bi0.5TiO3 piezoelectric ceramic nanopowders", Ceramics International, 41 (2015) 14157–14164. http://dx.doi.org/10.1016/j.ceramint.2015.07.038
M.A. Ezazi, Farazila Yosof. Ahmed A. D. Sarhan, "The employment of advanced Fiber Laser technology to weld dissimilar materials: Austenitic stainless steel 304 L with Aluminum alloy 5083 using pre-placed activating flux", Materials and Design, 87 (2015) 105–123. http://www.sciencedirect.com/science/article/pii/S0264127515302641
B. Rahmati, Ahmed A. D. Sarhan, E. Zalnezhad, Z. Kamiab, A. Dabbagh, D. Choudhury, W. A. B. W. Abas, " Development of Tantalum Oxide (Ta-O) thin film coating on biomedical Ti-6Al-4V alloy for better mechanical properties and biocompatibility enhancement" Ceramics International, 42 (2016) 466–480 http://www.sciencedirect.com/science/article/pii/S0272884215016594
S. Paria, S. Baradaran, Ahmed. A.D. Sarhan, S.N. Kazi, "Performance evaluation of latent heat energy storage in horizontal shell-and-finned tube for solar application", J Therm Anal Calorim (2016) 123:1371–1381 http://link.springer.com/article/10.1007/s10973-015-5006-1
N. Masmiati, Ahmed A. D. Sarhan, M. A. Hassan, M. Hamdi, "Novel Uses of SiO2 Nanolubrication in End-Milling of Medium Carbon Steel for Higher Compressive Residual Stress Measured by High Energy X-ray Diffraction Data" Proc IMechE Part J: J. Engineering Tribology, June 2016 vol. 230 no. 6, pp.697-708. http://pij.sagepub.com/content/230/6/697
G. Manadis, S. M. Rezaei, M. T. A. Zareinejad, Ahmed A. D. Sarhan, "A novel rate-dependent hysteresis modeling and position control technique for piezo-actuated bimorph beams", Journal of Intelligent Material Systems and Structures, August 2016 vol. 27 no. 13 1802-1813. http://jim.sagepub.com/content/27/13/1802
Houriyeh Marashi, Ahmed A. D. Sarhan, M. Hamdi, "Employing Ti Nano-powder Dielectric to Enhance Surface Characteristics in Electrical Discharge Machining of AISI D2 steel" Applied Surface Science, 357 (2015) 892–907 http://www.sciencedirect.com/science/article/pii/S0169433215021996
Mitra Akhtari Zavareh, Ahmed A. D. Sarhan, Wan Jeffrey Basirun, "Electrochemical Corrosion Behavior of Carbon Steel Pipes Coated With a Protective Ceramic Layer Using Plasma and HVOF Thermal Spray Techniques for Oil and Gas", Ceramics International, 42 (2016) 3397–3406. http://www.sciencedirect.com/science/article/pii/S0272884215020404
M.A Zavareh, Ahmed A D Sarhan, P.A Zavareh, W, J. Basirun, "Development and protection evaluation of two new advanced ceramic composites thermal spray coatings Al2O3-40TiO2 and Cr3C2-20NiCr on carbon steel petroleum oil piping", Ceramics International 42 (2016) 5203–5210 http://dx.doi.org/10.1016/j.ceramint.2015.12.044
80- E. Zalnezhad, E. Maleki, S.M. Banihashemian, Ahmed A D Sarhan, S. Ramesh, "Wettability, structural and optical properties investigation of TiO2 nanotubular arrays" Materials Research Bulletin, Volume 78, June 2016, Pages 179–185 http://www.sciencedirect.com/science/article/pii/S0025540816300356
Mahdi Sparham, Ahmed A. D. Sarhan, Mahidzal Dahari, Noor A Mardi, Mohd Hamdi, "Cutting force analysis to estimate the friction force in linear guideways of CNC machine", Measurement 85 (2016) 65–79. http://www.sciencedirect.com/science/article/pii/S0263224116000944
Nik Masmiati, Ahmed A.D. Sarhan, Mohsen Abdel Naeim Hassan, Mohd Hamdi, "Optimization of Cutting Conditions for Minimum Residual Stress, Cutting Force and Surface Roughness in End Milling of S50C Medium Carbon Steel", Measurement 86 (2016) 253–265. http://www.sciencedirect.com/science/article/pii/S0263224116001263
B. Rahmati, Ahmed A. D. Sarhan, W. A. B. W. Abas, " Ceramic tantalum oxide thin film coating to enhance the corrosion and wear characteristics of Ti-6Al-4V alloy", Journal of Alloys and Compounds 676 (2016) 369-376. http://www.sciencedirect.com/science/article/pii/S0925838816307721
Ibrahem Maher, Ahmed A. D. Sarhan, Houriyeh Marashi, Mohsen Marani Barzani, M. Hamdi, "White layer thickness prediction in WEDM using neuro-fuzzy modeling" Transactions of the IMF, 2016, 94:4, 204-210 http://dx.doi.org/10.1080/00202967.2016.1180847
A. Hozoorbakhsh, M. I.S. Ismail, N.B. Abdul Aziz, Ahmed A.D. Sarhan, A. Bahadoran, "An Investigation of Heat Transfer and Fluid Flow on Laser Micro-Welding upon the Thin Stainless Steel Sheet (SUS304) using Computational Fluid Dynamics (CFD)," International Communications in Heat and Mass Transfer 75 (2016) 328–340. ttp://dx.doi.org/10.1016/j.icheatmasstransfer.2016.05.008
Houriyeh Marashi, Davoud M Jafarlou, Ahmed A. D. Sarhan, Mohd Hamdi, "State of the art in powder mixed dielectric for EDM applications", Precision Engineering, Volume 46, October 2016, Pages 11–33. http://www.sciencedirect.com/science/article/pii/S0141635916300691
Houriyeh Marashi, D. M Jafarlou, Ahmed A. D. Sarhan, N. A. Mardi, "Employing severe plastic deformation to process electrical discharge machining electrodes", Precision engineering, Volume 46, October 2016, Pages 309–322 http://www.sciencedirect.com/science/article/pii/S014163591630071X
H. Amini, Behfar Farzaneh, Ahmed A. D. Sarhan, Noor Azizi, "Sensor-less Force-Reflecting Macro-Micro Telemanipulation systems by Piezoelectric actuators", ISA Transactions, Volume 64, September 2016, Pages 293–302. http://www.sciencedirect.com/science/article/pii/S0019057816300982
brahem Maher, Ahmed A.D. Sarhan, "Proposing a new performance index to identify the effect of spark energy and pulse frequency simultaneously to achieve high machining performance in WEDM," Int J Adv Manuf Technol, 2016, DOI 10.1007/s00170-016-9680-3 http://dx.doi.org/10.1007/s00170-016-9680-3
Mehdi Hourmand, Ahmed A. D. Sarhan, Noordin Mohd Yusof, "Development of new fabrication and measurement techniques of micro-electrodes with high aspect ratio for micro EDM using typical EDM machine", Measurement 97 (2017) 64–78. http://www.sciencedirect.com/science/article/pii/S026322411630656X
M. Hourmand, Ahmed A. D. Sarhan, M. D. Sayuti, "Micro-electrode fabrication processes for micro-EDM drilling and milling: A state of the art review", Int J Adv Manuf Technol, 2016, DOI: 10.1007/s00170-016-9671-4.http://dx.doi.org/10.1007/s00170-016-9671-4
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi "Design and experimental evaluation of precise compact tubular ultrasonic motor driven with single phase source", Precision Engineering 48 (2017) 172–180. http://www.sciencedirect.com/science/article/pii/S0141635916303944
F. Azimifar, M. Abrishamkar, B. Farzaneh, Ahmed A. D. Sarhan, H. Amini, "Improving Teleoperation System Performance in the Presence of Estimated External Force", Robotics and Computer–Integrated Manufacturing 46 (2017) 86–93. http://www.sciencedirect.com/science/article/pii/S0736584516301879
D. Abidou, N. Yusoff, N. Nazri, M. A. Awang, M. A. Hassan, Ahmed A.D. Sarhan, "Numerical Simulation of Metal Removal in Laser Drilling using Symmetric Smoothed Particle Hydrodynamics" Precision Engineering. 2017, DOI: 10.1016/j.precisioneng.2017.01.012.http://www.sciencedirect.com/science/article/pii/S014163591730034X
D. Abidou, N. Yusoff, N. Nazri, M. A. O. Awang, M. A Hassan, Ahmed A.D. Sarhan "Numerical Simulation of Metal Removal in Laser Drilling Using Radial Point Interpolation Method", Engineering Analysis with Boundary Elements, 77 (2017) 89–96. http://www.sciencedirect.com/science/article/pii/S0955799717300401
Yusuf S. Dambatta, Ahmed A. D. Sarhan, M Sayuti, M. Hamdi "Ultrasonic Assisted Grinding of Advanced Materials for Biomedical and Aerospace Applications-A Review" Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0316-z http://dx.doi.org/10.1007/s00170-017-0316-z
U. Sutharsini, M. Thanihaichelvan, C.H. Ting, S. Ramesh, C.Y. Tan, Hari Chandran, Ahmed A.D. Sarhan, S. Ramesh, I. Urriés "Effect of two-step sintering on the hydrothermal ageing resistance of tetragonal zirconia polycrystals", Ceramics International 43 (2017) 7594–7599 http://doi.org/10.1016/j.ceramint.2017.03.052
M. Z. Ibrahim, Ahmed A.D. Sarhan, F. Yusuf, M. Hamdi, "Biomedical materials and techniques to improve the tribological, mechanical and biomedical properties of orthopedic implants - A review article", Journal of Alloys and Compounds 714 (2017) 636-667. http://dx.doi.org/10.1016/j.jallcom.2017.04.231
M. Sparham, Ahmed A.D. Sarhan, M. Hamdi, N. Mardi, M. Dahari, "ANFIS modeling to predict the friction forces in CNC guideways and servomotor currents in the feed drive system to be employed in lubrication control system", Journal of Manufacturing Processes 28 (2017) 168–185. http://dx.doi.org/10.1016/j.jmapro.2017.05.020
V. Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Design and manufacturing of Ultrasonic motor with in-plane and out-of-plane bending vibration modes of rectangular plate with large contact area", Measurement 109 (2017) 425–431. http://dx.doi.org/10.1016/j.measurement.2017.06.007
A. H. Jalaludin, M. Hamdi, N. A. Mardi, Ahmed A. D. Sarhan, Md. Sayuti, S. R. Besharati, W. N. Izzati, Y. S. Dambatta, "Development and evaluation of the machining performance of a CNC gantry double motion machine tool in different modes", Int J Adv Manuf Technol, 2017, DOI: 10.1007/s00170-017-0332-z. https://link.springer.com/article/10.1007/s00170-017-0332-z
D. Abidou, Ahmed A.D. Sarhan, N. Yusoffa, N. Nazria, M.A. Omar Awangc, M. A. Hassane, "Numerical Simulation of Metal Removal in Laser Drilling using Meshless Local Petrov-Galerkin Collocation Method" Applied Mathematical Modelling, 2017, DOI:10.1016/j.apm.2017.08.032. https://doi.org/10.1016/j.apm.2017.08.032
Vahid Dabbagh, Ahmed. A. D. Sarhan, J. Akbari, N. A. Mardi, "Electromechanical modeling and high speed design of a tubular ultrasonic motor", The international journal of acoustics and vibration, Accepted

ME, KFUPM Bldg 63-Room 303 +966- 13 -860- 2547 +966-13-860 -2949 (ME Dept) ahsarhan@kfupm.edu.sa http://ahmedsarhan.com/

Faculty

Chairman

Professor

Associate Professor

Assistant Professor

Lecturer

Graduate Assistants