Education

Ph.D., Nuclear Engineering, The University of Tokyo, Japan

M.Sc., Nuclear Engineering, Grenoble Institute of Technology (Grenoble INP), France

B.Sc., Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh

Courses Taught

• CHE 486: Nuclear Power Plant Operations

Research Areas

• Materials for Sustainability
• Nuclear Engineering
• Techno-economic Analysis (TEA)
• Experimental and Computational Solid Mechanics
• Additive Manufacturing

Representative Publications

• Ar Rafi Ferdous, Syed Shaheen Shah, Syed Niaz Ali Shah, Bashir Ahmed Johan, Md Abdullah Al Bari and Md. Abdul Aziz: "Transforming Waste into Wealth: Advanced Carbon-Based    Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage", Molecules, April 2024, 29, 2081. https://doi.org/10.3390/molecules29092081
• Md Abdullah Al Bari, Shariful Kibria Nabil, Shabab Saad, Rahul Sarkar, Md Golam Kibria: “Economic and Environmental Assessment of Asphaltenederived Carbon Fiber Production”, Green Chemistry, Green Chemistry, July 2023, 6446-6458,  https://doi.org/10.1039/D3GC01573D

• Shariful Kibria Nabil, Soumyabrata Roy, Wala Ali Algozeeb, Tareq Al-Attas, Md Abdullah Al Bari, Ali Shayesteh Zeraati, Karthick Kannimuthu, Pedro Guerra Demingos, Adwitiya Rao, Thien N. Tran, Xiaowei Wu, Praveen Bollini, Haiqing Lin, Chandra Veer Singh, James M. Tour, Pulickel M. Ajayan, Md Golam Kibria: "Bifunctional Gas Diffusion Electrode Enables In-situ Separation and Conversion of CO2 to Ethylene from Dilute Stream", Advanced Materials, March 2023, 2300389, https://doi.org/10.1002/adma.202300389
• Samiul Alam, Md Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad,   Shabab Saad,   Md. Shahidul Islam,   Md Golam Kibria: "Effect of Pre-hydrolysis and Salt-impregnation on Biochar Production from Jute Stick", Biomass Conversion and Biorefinery, February 2023, https://doi.org/10.1007/s13399-023-03846-1
• Faisal Ahmed Shanta and Md Abdullah Al Bari: "Experimental and Numerical Investigation on Honeycomb, Modified Honeycomb, and Spiral Shapes of Cellular Structures", Structural Engineering and Mechanics, Vol. 84, No. 5, December 2022,  https://doi.org/10.12989/sem.2022.84.5.665
• M. A. S. R. Saadi, Paul. A. Advincula, Md Shajedul Haque Thakur, Ali Khater, Shabab Saad, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Aasha Zinke, Soumyabrata Roy, Minghe Lou, Sravani N. Bheemasetti, Md Abdullah Al Bari, Yiwen Zheng, Jacob L. Beckham, Venkataramana Gadhamshetty, Aniruddh Vashisth, Md Golam Kibria, James M. Tour, Pulickel M. Ajayan, Muhammad M. Rahman: "Sustainable Valorization of Asphaltenes via Flash Joule Heating", Science Advances, Vol. 8, No. 46, November 2022, 10.1126/sciadv.add3555
• Md Abdullah Al Bari, Ryota Sakemi, Yamato Katsura, Naoto Kasahara: "Proposal of Failure Mode Map under Dynamic Loading – Ratcheting and Collapse", Journal of Pressure Vessel Technology, ASME, Vol. 140(5)-051202, October 2018, doi:10.1115/1.4040892

Education

Ph.D., Nuclear Engineering, The University of Tokyo, Japan

M.Sc., Nuclear Engineering, Grenoble Institute of Technology (Grenoble INP), France

B.Sc., Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh

Courses Taught

• CHE 486: Nuclear Power Plant Operations

Research Areas

• Materials for Sustainability
• Nuclear Engineering
• Techno-economic Analysis (TEA)
• Experimental and Computational Solid Mechanics
• Additive Manufacturing

Representative Publications

• Ar Rafi Ferdous, Syed Shaheen Shah, Syed Niaz Ali Shah, Bashir Ahmed Johan, Md Abdullah Al Bari and Md. Abdul Aziz: "Transforming Waste into Wealth: Advanced Carbon-Based    Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage", Molecules, April 2024, 29, 2081. https://doi.org/10.3390/molecules29092081
• Md Abdullah Al Bari, Shariful Kibria Nabil, Shabab Saad, Rahul Sarkar, Md Golam Kibria: “Economic and Environmental Assessment of Asphaltenederived Carbon Fiber Production”, Green Chemistry, Green Chemistry, July 2023, 6446-6458,  https://doi.org/10.1039/D3GC01573D

• Shariful Kibria Nabil, Soumyabrata Roy, Wala Ali Algozeeb, Tareq Al-Attas, Md Abdullah Al Bari, Ali Shayesteh Zeraati, Karthick Kannimuthu, Pedro Guerra Demingos, Adwitiya Rao, Thien N. Tran, Xiaowei Wu, Praveen Bollini, Haiqing Lin, Chandra Veer Singh, James M. Tour, Pulickel M. Ajayan, Md Golam Kibria: "Bifunctional Gas Diffusion Electrode Enables In-situ Separation and Conversion of CO2 to Ethylene from Dilute Stream", Advanced Materials, March 2023, 2300389, https://doi.org/10.1002/adma.202300389
• Samiul Alam, Md Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad,   Shabab Saad,   Md. Shahidul Islam,   Md Golam Kibria: "Effect of Pre-hydrolysis and Salt-impregnation on Biochar Production from Jute Stick", Biomass Conversion and Biorefinery, February 2023, https://doi.org/10.1007/s13399-023-03846-1
• Faisal Ahmed Shanta and Md Abdullah Al Bari: "Experimental and Numerical Investigation on Honeycomb, Modified Honeycomb, and Spiral Shapes of Cellular Structures", Structural Engineering and Mechanics, Vol. 84, No. 5, December 2022,  https://doi.org/10.12989/sem.2022.84.5.665
• M. A. S. R. Saadi, Paul. A. Advincula, Md Shajedul Haque Thakur, Ali Khater, Shabab Saad, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Aasha Zinke, Soumyabrata Roy, Minghe Lou, Sravani N. Bheemasetti, Md Abdullah Al Bari, Yiwen Zheng, Jacob L. Beckham, Venkataramana Gadhamshetty, Aniruddh Vashisth, Md Golam Kibria, James M. Tour, Pulickel M. Ajayan, Muhammad M. Rahman: "Sustainable Valorization of Asphaltenes via Flash Joule Heating", Science Advances, Vol. 8, No. 46, November 2022, 10.1126/sciadv.add3555
• Md Abdullah Al Bari, Ryota Sakemi, Yamato Katsura, Naoto Kasahara: "Proposal of Failure Mode Map under Dynamic Loading – Ratcheting and Collapse", Journal of Pressure Vessel Technology, ASME, Vol. 140(5)-051202, October 2018, doi:10.1115/1.4040892

Education

Ph.D., Nuclear Engineering, The University of Tokyo, Japan

M.Sc., Nuclear Engineering, Grenoble Institute of Technology (Grenoble INP), France

B.Sc., Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh

Courses Taught

• CHE 486: Nuclear Power Plant Operations

Research Areas

• Materials for Sustainability
• Nuclear Engineering
• Techno-economic Analysis (TEA)
• Experimental and Computational Solid Mechanics
• Additive Manufacturing

Representative Publications

• Ar Rafi Ferdous, Syed Shaheen Shah, Syed Niaz Ali Shah, Bashir Ahmed Johan, Md Abdullah Al Bari and Md. Abdul Aziz: "Transforming Waste into Wealth: Advanced Carbon-Based    Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage", Molecules, April 2024, 29, 2081. https://doi.org/10.3390/molecules29092081
• Md Abdullah Al Bari, Shariful Kibria Nabil, Shabab Saad, Rahul Sarkar, Md Golam Kibria: “Economic and Environmental Assessment of Asphaltenederived Carbon Fiber Production”, Green Chemistry, Green Chemistry, July 2023, 6446-6458,  https://doi.org/10.1039/D3GC01573D

• Shariful Kibria Nabil, Soumyabrata Roy, Wala Ali Algozeeb, Tareq Al-Attas, Md Abdullah Al Bari, Ali Shayesteh Zeraati, Karthick Kannimuthu, Pedro Guerra Demingos, Adwitiya Rao, Thien N. Tran, Xiaowei Wu, Praveen Bollini, Haiqing Lin, Chandra Veer Singh, James M. Tour, Pulickel M. Ajayan, Md Golam Kibria: "Bifunctional Gas Diffusion Electrode Enables In-situ Separation and Conversion of CO2 to Ethylene from Dilute Stream", Advanced Materials, March 2023, 2300389, https://doi.org/10.1002/adma.202300389
• Samiul Alam, Md Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad,   Shabab Saad,   Md. Shahidul Islam,   Md Golam Kibria: "Effect of Pre-hydrolysis and Salt-impregnation on Biochar Production from Jute Stick", Biomass Conversion and Biorefinery, February 2023, https://doi.org/10.1007/s13399-023-03846-1
• Faisal Ahmed Shanta and Md Abdullah Al Bari: "Experimental and Numerical Investigation on Honeycomb, Modified Honeycomb, and Spiral Shapes of Cellular Structures", Structural Engineering and Mechanics, Vol. 84, No. 5, December 2022,  https://doi.org/10.12989/sem.2022.84.5.665
• M. A. S. R. Saadi, Paul. A. Advincula, Md Shajedul Haque Thakur, Ali Khater, Shabab Saad, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Aasha Zinke, Soumyabrata Roy, Minghe Lou, Sravani N. Bheemasetti, Md Abdullah Al Bari, Yiwen Zheng, Jacob L. Beckham, Venkataramana Gadhamshetty, Aniruddh Vashisth, Md Golam Kibria, James M. Tour, Pulickel M. Ajayan, Muhammad M. Rahman: "Sustainable Valorization of Asphaltenes via Flash Joule Heating", Science Advances, Vol. 8, No. 46, November 2022, 10.1126/sciadv.add3555
• Md Abdullah Al Bari, Ryota Sakemi, Yamato Katsura, Naoto Kasahara: "Proposal of Failure Mode Map under Dynamic Loading – Ratcheting and Collapse", Journal of Pressure Vessel Technology, ASME, Vol. 140(5)-051202, October 2018, doi:10.1115/1.4040892

Education

Ph.D., Nuclear Engineering, The University of Tokyo, Japan

M.Sc., Nuclear Engineering, Grenoble Institute of Technology (Grenoble INP), France

B.Sc., Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh

Courses Taught

• CHE 486: Nuclear Power Plant Operations

Research Areas

• Materials for Sustainability
• Nuclear Engineering
• Techno-economic Analysis (TEA)
• Experimental and Computational Solid Mechanics
• Additive Manufacturing

Representative Publications

• Ar Rafi Ferdous, Syed Shaheen Shah, Syed Niaz Ali Shah, Bashir Ahmed Johan, Md Abdullah Al Bari and Md. Abdul Aziz: "Transforming Waste into Wealth: Advanced Carbon-Based    Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage", Molecules, April 2024, 29, 2081. https://doi.org/10.3390/molecules29092081
• Md Abdullah Al Bari, Shariful Kibria Nabil, Shabab Saad, Rahul Sarkar, Md Golam Kibria: “Economic and Environmental Assessment of Asphaltenederived Carbon Fiber Production”, Green Chemistry, Green Chemistry, July 2023, 6446-6458,  https://doi.org/10.1039/D3GC01573D

• Shariful Kibria Nabil, Soumyabrata Roy, Wala Ali Algozeeb, Tareq Al-Attas, Md Abdullah Al Bari, Ali Shayesteh Zeraati, Karthick Kannimuthu, Pedro Guerra Demingos, Adwitiya Rao, Thien N. Tran, Xiaowei Wu, Praveen Bollini, Haiqing Lin, Chandra Veer Singh, James M. Tour, Pulickel M. Ajayan, Md Golam Kibria: "Bifunctional Gas Diffusion Electrode Enables In-situ Separation and Conversion of CO2 to Ethylene from Dilute Stream", Advanced Materials, March 2023, 2300389, https://doi.org/10.1002/adma.202300389
• Samiul Alam, Md Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad,   Shabab Saad,   Md. Shahidul Islam,   Md Golam Kibria: "Effect of Pre-hydrolysis and Salt-impregnation on Biochar Production from Jute Stick", Biomass Conversion and Biorefinery, February 2023, https://doi.org/10.1007/s13399-023-03846-1
• Faisal Ahmed Shanta and Md Abdullah Al Bari: "Experimental and Numerical Investigation on Honeycomb, Modified Honeycomb, and Spiral Shapes of Cellular Structures", Structural Engineering and Mechanics, Vol. 84, No. 5, December 2022,  https://doi.org/10.12989/sem.2022.84.5.665
• M. A. S. R. Saadi, Paul. A. Advincula, Md Shajedul Haque Thakur, Ali Khater, Shabab Saad, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Aasha Zinke, Soumyabrata Roy, Minghe Lou, Sravani N. Bheemasetti, Md Abdullah Al Bari, Yiwen Zheng, Jacob L. Beckham, Venkataramana Gadhamshetty, Aniruddh Vashisth, Md Golam Kibria, James M. Tour, Pulickel M. Ajayan, Muhammad M. Rahman: "Sustainable Valorization of Asphaltenes via Flash Joule Heating", Science Advances, Vol. 8, No. 46, November 2022, 10.1126/sciadv.add3555
• Md Abdullah Al Bari, Ryota Sakemi, Yamato Katsura, Naoto Kasahara: "Proposal of Failure Mode Map under Dynamic Loading – Ratcheting and Collapse", Journal of Pressure Vessel Technology, ASME, Vol. 140(5)-051202, October 2018, doi:10.1115/1.4040892

Education

Ph.D., Nuclear Engineering, The University of Tokyo, Japan

M.Sc., Nuclear Engineering, Grenoble Institute of Technology (Grenoble INP), France

B.Sc., Mechanical Engineering, Khulna University of Engineering & Technology, Bangladesh

Courses Taught

• CHE 486: Nuclear Power Plant Operations

Research Areas

• Materials for Sustainability
• Nuclear Engineering
• Techno-economic Analysis (TEA)
• Experimental and Computational Solid Mechanics
• Additive Manufacturing

Representative Publications

• Ar Rafi Ferdous, Syed Shaheen Shah, Syed Niaz Ali Shah, Bashir Ahmed Johan, Md Abdullah Al Bari and Md. Abdul Aziz: "Transforming Waste into Wealth: Advanced Carbon-Based    Electrodes Derived from Refinery and Coal By-Products for Next-Generation Energy Storage", Molecules, April 2024, 29, 2081. https://doi.org/10.3390/molecules29092081
• Md Abdullah Al Bari, Shariful Kibria Nabil, Shabab Saad, Rahul Sarkar, Md Golam Kibria: “Economic and Environmental Assessment of Asphaltenederived Carbon Fiber Production”, Green Chemistry, Green Chemistry, July 2023, 6446-6458,  https://doi.org/10.1039/D3GC01573D

• Shariful Kibria Nabil, Soumyabrata Roy, Wala Ali Algozeeb, Tareq Al-Attas, Md Abdullah Al Bari, Ali Shayesteh Zeraati, Karthick Kannimuthu, Pedro Guerra Demingos, Adwitiya Rao, Thien N. Tran, Xiaowei Wu, Praveen Bollini, Haiqing Lin, Chandra Veer Singh, James M. Tour, Pulickel M. Ajayan, Md Golam Kibria: "Bifunctional Gas Diffusion Electrode Enables In-situ Separation and Conversion of CO2 to Ethylene from Dilute Stream", Advanced Materials, March 2023, 2300389, https://doi.org/10.1002/adma.202300389
• Samiul Alam, Md Abdullah Al Bari, Shadman Tahsin Nabil, Sk. Tahmid Muhatashin Fuyad,   Shabab Saad,   Md. Shahidul Islam,   Md Golam Kibria: "Effect of Pre-hydrolysis and Salt-impregnation on Biochar Production from Jute Stick", Biomass Conversion and Biorefinery, February 2023, https://doi.org/10.1007/s13399-023-03846-1
• Faisal Ahmed Shanta and Md Abdullah Al Bari: "Experimental and Numerical Investigation on Honeycomb, Modified Honeycomb, and Spiral Shapes of Cellular Structures", Structural Engineering and Mechanics, Vol. 84, No. 5, December 2022,  https://doi.org/10.12989/sem.2022.84.5.665
• M. A. S. R. Saadi, Paul. A. Advincula, Md Shajedul Haque Thakur, Ali Khater, Shabab Saad, Ali Shayesteh Zeraati, Shariful Kibria Nabil, Aasha Zinke, Soumyabrata Roy, Minghe Lou, Sravani N. Bheemasetti, Md Abdullah Al Bari, Yiwen Zheng, Jacob L. Beckham, Venkataramana Gadhamshetty, Aniruddh Vashisth, Md Golam Kibria, James M. Tour, Pulickel M. Ajayan, Muhammad M. Rahman: "Sustainable Valorization of Asphaltenes via Flash Joule Heating", Science Advances, Vol. 8, No. 46, November 2022, 10.1126/sciadv.add3555
• Md Abdullah Al Bari, Ryota Sakemi, Yamato Katsura, Naoto Kasahara: "Proposal of Failure Mode Map under Dynamic Loading – Ratcheting and Collapse", Journal of Pressure Vessel Technology, ASME, Vol. 140(5)-051202, October 2018, doi:10.1115/1.4040892